Value Brand
Value Brand 6ACJ2 Enclosed Fan Relay SPDT 120V Coil
Enclosed SPDT relay with a 120 V coil switches resistive loads, single-phase motors, solenoids and two-speed motors at 14 A (120 V) or 8 A (240 V)
- Handles resistive and motor loads up to 14 A at 120 V AC
- Operates on standard 50/60 Hz mains without special wiring
- SPDT contact form gives both normally-open and normally-closed switching in one relay
- Silver-alloy contacts resist welding and extend service life
- Quick-connect spade terminals speed up installation and maintenance
Enclosed Relay for HVAC Switching
The Value Brand 6ACJ2 is an enclosed fan relay built for HVAC control circuits that switch resistive loads, single-phase motors, solenoids and two-speed motors. It uses a 120 V AC coil and SPDT contacts rated for 14 A at 120 V AC and 8 A at 240 V AC.
Square Base with Spade Terminals
A square base and silver-alloy-on-copper spade terminals give a compact, vibration-resistant mount that suits panel or DIN-rail installations. The enclosed housing protects the contacts from dust and moisture in mechanical rooms, while the 50/60 Hz rating covers standard mains frequencies.
Coil Voltage Limits the Application
The 120 V AC coil means the relay cannot be driven directly from low-voltage thermostat signals or 24 V control circuits without an additional transformer or interposing relay. The 60 A locked-rotor rating at 120 V AC handles motor inrush, but the 8 A limit at 240 V AC restricts use on higher-voltage loads.
Highlights
- Handles resistive and motor loads up to 14 A at 120 V AC
- Operates on standard 50/60 Hz mains without special wiring
- SPDT contact form gives both normally-open and normally-closed switching in one relay
- Silver-alloy contacts resist welding and extend service life
- Quick-connect spade terminals speed up installation and maintenance
Specifications
| Brand | ZORO SELECT |
|---|
Questions about this item
What loads can the 120V coil relay switch at 14 amps?
The SPDT relay handles resistive loads, single-phase motors, solenoids and two-speed motors at 14 A on 120 V AC.
What terminal type fits the square-base relay?
Spade terminals with silver-alloy and copper contacts are used for electrical connection.
How is the relay mounted and wired in an enclosure?
The square base fits standard panel cut-outs; connect spade terminals to the coil and load circuits, observing 50/60 Hz rating and 60 A locked-rotor limit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
