We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanised malleable iron 90 degree elbow fitting with female NPT threads

Value Brand

Value Brand 5P802 Malleable Iron 90° Elbow 1 1/2" NPT

SKU CH-BNSH-X10MZ

A 90-degree malleable iron elbow with galvanised Class 150 finish connects 1 1/2-inch NPT female threads

  • Durable malleable iron construction ensures long service life
  • 90° elbow redirects flow efficiently in tight spaces
  • 1 1/2" NPT female threads connect standard pipe sizes
  • Class 150 rating supports typical residential plumbing pressure
  • Galvanized finish resists corrosion in water applications

Plumbing elbow for directional changes

The Value Brand 5P802 is a 90-degree malleable iron elbow designed to join two pipes at a right angle in plumbing systems. It suits installers who need a durable, galvanized Class 150 fitting with female NPT threads on both ends. This component handles standard water, gas, or air distribution tasks where a secure, corrosion-resistant connection is required. Buyers who need a straight coupler or a different thread standard cannot use this part.

Simple threaded installation with sealant

Installation requires applying pipe thread sealant or tape to the male threads before screwing them into the female NPT ports of the elbow. The galvanized malleable iron body accepts standard tools and resists cracking during tightening. The most common issue is cross-threading or insufficient sealant, which causes leaks at the joint. Over-tightening can stress the iron casting, so the connection should be snug but not forced beyond the thread engagement.

Verify thread size and pressure class first

Before ordering, confirm that the existing piping uses 1 1/2 inch NPT threads with 11 1/2 threads per inch on both sides of the connection. The fitting is rated for Class 150 service, so the system pressure must fall within that range. Check that the galvanized finish is compatible with the fluid being conveyed and that local codes permit malleable iron for the intended application. The product carries a California Proposition 65 warning for chemicals known to cause cancer and reproductive harm.

Highlights

  • Durable malleable iron construction ensures long service life
  • 90° elbow redirects flow efficiently in tight spaces
  • 1 1/2" NPT female threads connect standard pipe sizes
  • Class 150 rating supports typical residential plumbing pressure
  • Galvanized finish resists corrosion in water applications

Specifications

BrandZORO SELECT

Questions about this item

How can I confirm the elbow is seated correctly after threading it onto 1 1/2" NPT pipe?

After hand-tightening, turn the fitting an additional two to three full turns with a pipe wrench until the joint feels solid and the 90° angle aligns with your piping run; pressure-test the system at its working pressure to verify no leaks appear at the threads.

What comes with the ZORO SELECT 5P802 elbow and what must I supply myself?

The box contains only the single malleable-iron 90° elbow with 1 1/2" female NPT threads on both ends; you must provide the matching male NPT pipe nipples, thread sealant or tape, and wrenches for installation.

Which version of this fitting should I choose for a standard 150 psi water line?

The listed Class 150 galvanized malleable-iron elbow is the correct choice for typical 150 psi water-service piping; no other class or material variant is offered for this model.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.