We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanised malleable iron 90-degree elbow with 1/2 NPT female threads

Value Brand

Value Brand 5P798 90 Degree Elbow 1/2 NPT Malleable Iron

SKU CH-5BEG-83SHH

A 90-degree galvanised malleable iron elbow with 1/2 inch NPT female threads, rated Class 150

  • 90-degree turn routes pipe around obstacles
  • Malleable iron construction resists cracking under pressure
  • Galvanized coating protects against rust in damp areas
  • Class 150 rating handles standard plumbing pressures
  • 1/2 inch NPT threads match common pipe sizes

90 Degree Elbow 1/2 NPT

The Value Brand 5P798 is a galvanised malleable iron elbow rated Class 150 for joining two 1/2 inch female NPT threads at a 90 degree angle. It suits plumbing and compressed-air installations that require a compact directional change.

Class 150 Pressure Limit

Class 150 defines the maximum working pressure for this fitting at standard temperatures; exceeding that rating risks leakage or structural failure. The galvanised coating resists corrosion in water systems but is not intended for potable-water lines without verifying local code compliance.

Threaded Installation Notes

Tapered NPT threads seal with PTFE tape or pipe dope applied to the male threads before assembly. Over-tightening can crack the malleable iron casting, while under-tightening leaves a leak path; installers should follow standard pipe-thread engagement practice.

Highlights

  • 90-degree turn routes pipe around obstacles
  • Malleable iron construction resists cracking under pressure
  • Galvanized coating protects against rust in damp areas
  • Class 150 rating handles standard plumbing pressures
  • 1/2 inch NPT threads match common pipe sizes

Specifications

BrandZORO SELECT

Questions about this item

What does the Class 150 rating mean for this 90 Degree Elbow?

Class 150 indicates the pressure class for this malleable iron fitting, suitable for standard plumbing pressures up to 150 psi in typical residential and commercial water systems.

How does the 90 degree angle affect flow in a real piping installation?

The 90 degree elbow changes pipe direction by a right angle; malleable iron construction provides durability, while the galvanized coating resists corrosion in water supply lines.

What does the 1/2 inch NPT female thread specification cap in practice?

The 1/2 inch NPT female threads accept matching male NPT pipe or fittings, sealing with thread tape or compound for leak-free connections in galvanized iron piping systems.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.