We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanised malleable iron 90-degree elbow coupling with female NPT threads

Value Brand

Value Brand 5P795 Malleable Iron 90 Elbow 1/8 NPT Coupling

SKU CH-2VG4-NK7KF

Malleable iron 90-degree elbow fitting with 1/8 NPT female threads, galvanised Class 150

  • 90-degree elbow redirects flow in tight spaces
  • Malleable iron construction resists cracking under pressure
  • Galvanized coating protects against corrosion in wet systems
  • Class 150 rating handles standard plumbing pressures
  • 1/8 inch NPT threads connect to common pipe sizes

1/8 NPT Malleable Iron Elbow

This 90-degree elbow fitting connects two 1/8-inch female NPT threads in plumbing and compressed-air systems. Made from Class 150 galvanised malleable iron, it suits installers needing a durable, corrosion-resistant joint for low-pressure water, air or gas lines. The compact radius keeps pipe runs tight in confined plant rooms or equipment skids.

Threaded installation with sealant

Apply PTFE tape or pipe dope to the male threads before engaging the female NPT ports to prevent leaks. Over-tightening can crack the malleable iron casting, so stop when the joint feels firm and the fitting aligns at 90 degrees. Galvanised surfaces may show white rust after long storage; wipe clean before assembly.

Check thread size and pressure class

Verify that your existing pipe or equipment uses 1/8-inch NPT threads and that the system pressure stays within Class 150 limits. This fitting is not rated for higher-pressure hydraulic circuits or for potable-water systems requiring lead-free certification. Confirm chemical compatibility with the conveyed fluid before ordering.

Highlights

  • 90-degree elbow redirects flow in tight spaces
  • Malleable iron construction resists cracking under pressure
  • Galvanized coating protects against corrosion in wet systems
  • Class 150 rating handles standard plumbing pressures
  • 1/8 inch NPT threads connect to common pipe sizes

Specifications

BrandZORO SELECT

Questions about this item

How can I confirm the 90-degree elbow is correctly seated after threading it onto 1/8 NPT pipe?

After assembly the joint should show no visible gaps between the galvanized malleable iron faces and the pipe threads; a pressure test up to the Class 150 rating will verify a leak-free seal.

What comes in the package and are any extra sealing materials required?

The box contains the single ZORO SELECT 90-degree elbow with 1/8 in female NPT threads on both ends; thread sealant or tape must be purchased separately for installation.

Which version should I choose if I need a galvanized Class 150 fitting for 1/8 NPT piping?

This 5P795 model is the galvanized malleable iron Class 150 elbow with 1/8 in female NPT ports, matching that exact specification.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.