Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00925654BTC
In stock
Value Brand
Value Brand 4PGA6 Manual 2-Way Ball Valve Socket PVC
Manual two-way PVC ball valve handles water flow up to 225 psi with a non-locking lever
- TypeOther
- Manual two-way flow control with PVC body
- Rated for 225 psi maximum operating pressure
- Standard port design for water media applications
- Lever handle provides non-locking operation
- California Proposition 65 chemical warning applies
Manual 2-Way Ball Valve for Water Systems
The PVC ball valve controls water flow in residential and light-commercial plumbing. It uses a two-piece straight body with a standard-port PVC ball and a non-locking lever handle. The valve is rated for a maximum operating pressure of 225 psi and carries California Proposition 65 warnings for cancer and reproductive-harm chemicals.
Sustained Pressure and Chemical Resistance
Under continuous 225 psi water pressure the PVC body and ball resist corrosion and scale buildup better than metal alternatives. The two-piece construction keeps the seal stable during long duty cycles without the creep seen in single-piece moulded valves. Steam, vacuum and combustible-gas services are not rated, so the valve must stay on cold-water lines only.
Simple Solvent-Weld Installation
The socket ends accept standard 3/4 inch PVC pipe with solvent cement, requiring no threading tools or flange kits. A common error is applying cement to the valve socket while the ball is closed, which can fuse the ball to the seats and prevent operation. Keep the lever open during assembly and allow full cure time before pressurising the line.
Highlights
- Manual two-way flow control with PVC body
- Rated for 225 psi maximum operating pressure
- Standard port design for water media applications
- Lever handle provides non-locking operation
- California Proposition 65 chemical warning applies
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Other |
Questions about this item
Does the lever handle stay cool and quiet when water runs through the valve all day?
The valve body and ball are PVC with a lever handle; the material does not generate heat or noise during continuous water flow.
What pipe fittings do I need to connect this 3/4 inch socket valve to my plumbing?
The valve has 3/4 inch socket ends, so you need matching 3/4 inch PVC pipe and solvent cement for a permanent joint.
Will the 225 psi pressure rating match the older PVC piping already in my system?
The valve is rated for 225 psi maximum operating pressure; verify that your existing piping is rated for at least the same pressure before installing.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
