We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanised malleable iron 45° elbow with 2 inch NPT threads

Value Brand

Value Brand 45° Elbow 2" NPT Malleable Iron Class 150

SKU CH-DJQ2-HDK2F

A 45-degree malleable iron elbow with 2-inch NPT female threads, galvanized and rated Class 150 for plumbing systems

  • 45° elbow directs flow smoothly in tight plumbing runs
  • Malleable iron construction withstands Class 150 pressure ratings
  • Galvanized finish resists corrosion on 2 in NPT threads
  • Female NPT threads on both ends simplify pipe connections
  • California Prop 65 warning notes chemical exposure risk

2-inch NPT 45° elbow for piping systems

This galvanised malleable-iron fitting connects two female NPT threads at a 45-degree angle. It is rated Class 150 for standard-pressure water, air or gas lines in residential and light-commercial installations.

Pressure containment under continuous service

Class 150 designation means the elbow is tested for steady-state pressure rather than momentary surge. The malleable-iron body resists deformation when the system operates at its rated pressure for extended periods.

Galvanised coating and thread compatibility

The zinc-galvanised finish protects the iron from corrosion in damp environments. Both ends use 11-1/2 threads per inch NPT, so the joint seals with standard pipe tape or compound without proprietary adapters.

Highlights

  • 45° elbow directs flow smoothly in tight plumbing runs
  • Malleable iron construction withstands Class 150 pressure ratings
  • Galvanized finish resists corrosion on 2 in NPT threads
  • Female NPT threads on both ends simplify pipe connections
  • California Prop 65 warning notes chemical exposure risk

Specifications

BrandZORO SELECT

Questions about this item

Will the malleable iron elbow get hot or make noise when water runs through it all day?

The galvanized malleable iron body stays at fluid temperature and has no moving parts, so it adds no heat or sound of its own.

What pipe threads must I already have to connect this 2 in NPT elbow?

You need two lengths of pipe or fittings with 2 in NPT male threads cut to the 11 1/2 thread standard.

Can I join this Class 150 elbow to older black iron pipe that has been in the wall for years?

Yes, the NPT threads match the same 11 1/2 standard used on legacy black iron, so the joint will seal with proper thread tape or paste.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.