We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized malleable iron 45 degree elbow with 1 1/2 inch NPT threads

Value Brand

Value Brand 45° Elbow 1 1/2" NPT Malleable Iron Galvanized Class 150

SKU CH-0MPX-7054Z

A 45° galvanized malleable iron elbow with 1 1/2" NPT female threads for Class 150 plumbing systems

  • 45° elbow redirects pipe runs smoothly
  • Malleable iron construction resists cracking under pressure
  • Galvanised coating protects against rust and corrosion
  • Class 150 rating suits standard low-pressure systems
  • 1 1/2" NPT female threads match common pipe sizes

45° Malleable Iron Elbow

This 1 1/2 inch NPT galvanised fitting joins two female threaded pipes at a forty-five degree angle. It is rated Class 150 for standard pressure service in water, air or oil lines. The malleable iron body resists mechanical shock better than cast alternatives. Installers use it where a gradual direction change reduces flow turbulence.

Class 150 pressure headroom

The Class 150 rating covers typical residential and light commercial pressures at ambient temperature. It handles normal service pressures with margin for pressure spikes from pump starts or water hammer. The rating does not extend to high-pressure steam or process piping above the class limit. Verify system design pressure before installation.

Galvanised coating benefit

The hot-dip galvanised finish protects the iron from corrosion in exposed or damp environments. It eliminates the need for field-applied paint on the fitting body. Thread sealant is still required on the NPT joints to ensure a leak-free seal. The coating adds no measurable flow restriction inside the bore.

Highlights

  • 45° elbow redirects pipe runs smoothly
  • Malleable iron construction resists cracking under pressure
  • Galvanised coating protects against rust and corrosion
  • Class 150 rating suits standard low-pressure systems
  • 1 1/2" NPT female threads match common pipe sizes

Specifications

BrandZORO SELECT

Questions about this item

Will this 45° elbow thread onto my existing 1 1/2" NPT galvanized pipe without leaks?

Yes, both ends are 1 1/2" female NPT with 11 1/2 threads per inch, matching standard galvanized pipe of the same size.

How can I confirm the joint is sound after I tighten the fitting?

Pressurise the system and check the threads and the galvanized surface for any moisture; a dry joint means the Class 150 malleable iron elbow is sealing correctly.

Does the box include thread sealant or do I need to buy tape and compound separately?

Only the Zoro Select 45° elbow is supplied; pipe thread tape, sealant and any nipples or couplings must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.