We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
45 degree street elbow half inch NPT malleable iron class 150

Value Brand

Value Brand 45 Degree Street Elbow 1/2" NPT Class 150 Malleable Iron

SKU CH-5PAX-6H7EH

A 45 degree street elbow connects 1/2 inch NPT male and female threads in malleable iron rated Class 150

  • 45° street elbow changes pipe direction in tight spaces
  • Class 150 malleable iron withstands standard pressure service
  • 1/2" NPT male and female threads connect directly to pipe
  • Zoro Select brand identifies the manufacturer supply line
  • Model 6KH97 distinguishes this fitting in ordering systems

45 Degree Street Elbow 1/2 Inch NPT

This malleable iron fitting redirects flow at 45 degrees between a 1/2 inch female NPT port and a 1/2 inch male NPT port. It is rated for Class 150 service and suits plumbing, compressed air and light industrial piping systems. The Zoro Select branding identifies the manufacturer supply line.

Suited for standard 1/2 inch NPT networks

Installers joining two 1/2 inch NPT threads at a 45-degree offset will find the correct thread form and pressure class here. Buyers who require a different thread size, a different angle, or a pressure rating above Class 150 cannot use this fitting.

Class 150 pressure rating

The single specification that decides fit is the Class 150 designation, which defines the maximum allowable working pressure for the fitting at the rated temperature. Verify that your system design stays within this class before installation.

Highlights

  • 45° street elbow changes pipe direction in tight spaces
  • Class 150 malleable iron withstands standard pressure service
  • 1/2" NPT male and female threads connect directly to pipe
  • Zoro Select brand identifies the manufacturer supply line
  • Model 6KH97 distinguishes this fitting in ordering systems

Specifications

BrandZoro Select

Questions about this item

What pipe thread size must I already have to connect this 1/2" NPT street elbow?

You need 1/2" NPT threads on both the female and male ends of your existing pipe or fitting for this elbow to thread on correctly.

Will the Class 150 malleable iron hold up if I keep my older brass or steel piping in the same run?

Yes, the Class 150 malleable iron body is compatible with standard brass and steel NPT piping at the same pressure class.

How can I confirm the 45-degree angle is seated properly after installation?

Check that the centre-to-end dimension measures 14 on each side and that no threads are visible once the joint is fully tightened.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.