We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass 45-degree elbow fitting with female threaded ends

Value Brand

Value Brand 45 Degree Elbow Brass 1 1/4 in Female

SKU CH-MS83-8422Z

A 45-degree brass elbow connects 1 1/4-inch female threads at a Class 125 rating with 200 psi maximum operating pressure

  • 45-degree elbow directs flow smoothly in tight plumbing runs
  • Red brass construction resists corrosion for long service life
  • Class 125 rating suits standard residential and light commercial systems
  • Female threaded ends on both ports accept 1-1/4 inch pipe without adapters
  • 200 psi maximum operating pressure handles typical water supply demands

45 Degree Brass Elbow for Plumbing

The Value Brand 45 degree elbow redirects pipe runs by forty five degrees using a brass body rated for class 125 service. It suits residential and light commercial water supply installations that require a directional change.

Pressure Rating and Material Safety

The fitting withstands up to 200 psi maximum operating pressure under normal conditions. California Proposition 65 warnings indicate the brass contains chemicals recognised by the state to cause cancer and birth defects or other reproductive harm.

Threaded Female Connections

Both ends feature 1 1/4 inch female threaded ports for joining to male pipe threads without soldering. The brass construction resists corrosion in potable water systems while the elbow geometry fits tight spaces where straight couplings cannot.

Highlights

  • 45-degree elbow directs flow smoothly in tight plumbing runs
  • Red brass construction resists corrosion for long service life
  • Class 125 rating suits standard residential and light commercial systems
  • Female threaded ends on both ports accept 1-1/4 inch pipe without adapters
  • 200 psi maximum operating pressure handles typical water supply demands

Specifications

BrandZoro Select

Questions about this item

How do I install the 1 1/4 in female threaded ends without stripping the brass?

Apply PTFE tape or pipe dope to the male threads, then hand-tighten before using a wrench for one to two additional turns; over-tightening the Class 125 brass can crack the fitting.

What maintenance will this elbow need over time?

Inspect the threaded joints annually for green corrosion or weeping; if leaks appear, disassemble, clean threads with a wire brush, reapply sealant and reassemble to the same torque.

At what pressure does this fitting reach its limit during sustained use?

The maximum operating pressure is 200 psi; continuous operation above that rating will cause the brass body to deform and eventually leak.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.