We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White ABS 45-degree street elbow, 2-inch hub and spigot, Schedule 40

Value Brand

Value Brand 45 Deg Street Elbow 2 in Hub x Spigot

SKU CH-QSDB-3QGGH

A 45-degree ABS street elbow connects 2-inch hub and spigot fittings for Schedule 40 gravity-flow drainage

  • 45° turn routes pipe around obstacles with smooth flow
  • ABS construction resists corrosion in drain and vent systems
  • Schedule 40 rating handles standard gravity-flow pressure demands
  • Hub-by-spigot design joins 2 in socket to 2 in spigot directly
  • Operates reliably from -20 °F to 140 °F in gravity applications

45 Degree ABS Street Elbow

This 45 degree street elbow is an ABS Schedule 40 fitting designed for gravity flow plumbing systems. It connects a 2 inch hub socket to a 2 inch male spigot end. The fitting suits installers who need a fixed angle change in a drainage or vent line. It is not intended for pressurised applications beyond gravity flow limits.

Sustained temperature and pressure rating

The fitting operates continuously between -20 degrees and 140 degrees Fahrenheit. Its maximum operating pressure is rated for gravity flow only. The ABS Schedule 40 construction maintains dimensional stability across this temperature range. Performance under sustained load stays within these published thermal and pressure boundaries.

Verify pipe schedule and diameter before ordering

Confirm your existing pipe is Schedule 40 with a 2 3/8 inch outside diameter to match the hub and spigot dimensions. The overall length measures 3 19/32 inches, so check available space in the assembly. A seal is not included with the fitting and must be sourced separately if required by your joint method. This item cannot be sold into certain restricted states.

Highlights

  • 45° turn routes pipe around obstacles with smooth flow
  • ABS construction resists corrosion in drain and vent systems
  • Schedule 40 rating handles standard gravity-flow pressure demands
  • Hub-by-spigot design joins 2 in socket to 2 in spigot directly
  • Operates reliably from -20 °F to 140 °F in gravity applications

Specifications

BrandZORO SELECT

Questions about this item

How much heat can the ABS material withstand during continuous gravity-flow drainage?

The fitting is rated for temperatures from minus 20 up to 140 degrees Fahrenheit, so it handles typical hot-water discharge without softening.

What pipe schedule and diameter must already be in place for this street elbow to connect?

It requires Schedule 40 ABS pipe with a 2 3/8 inch outside diameter to match the 2 inch hub and spigot ends.

Will the 45-degree sweep clear a standard 2 inch ABS trap arm when installed in tight stud bays?

The overall length is 3 19/32 inches and the socket depth is 2 11/16 inches, giving a compact radius that fits typical framing cavities.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.