We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White ABS 45-degree elbow hub-to-hub fitting schedule 40

Value Brand

Value Brand 45 Deg Elbow 2 in Hub x Hub Schedule 40

SKU CH-C3XP-TFG5K

A 45-degree ABS elbow joins two 2-inch hub connections in Schedule 40 drain, waste and vent systems

  • 45-degree turn routes pipe around obstacles smoothly
  • Hub-to-hub solvent-weld joint seals without threads
  • Schedule 40 wall handles 180 °F continuous service
  • ABS construction resists impact down to −40 °F
  • Meets ASTM D3965 cell class 32222 for code compliance

2-Inch Schedule 40 Hub Elbow

This 45-degree elbow is an ABS pipe fitting designed for drainage, waste and vent systems. It connects two hub ends of 2-inch Schedule 40 pipe in a fixed angular change. The fitting meets ASTM D3965 cell class 32222 for material quality. It suits residential and light commercial plumbing installations.

Temperature-Rated ABS Performance

The fitting operates continuously from minus 40 degrees to 180 degrees Fahrenheit without loss of structural integrity. ABS material resists impact and chemical attack from typical household waste. Schedule 40 wall thickness maintains shape under sustained soil loads and thermal cycling. The hub-to-hub joint retains seal integrity through repeated expansion and contraction.

Solvent-Weld Hub Installation

Each hub end accepts standard 2-inch Schedule 40 pipe for solvent cement welding. Clean, dry and deburr pipe ends before applying primer and cement to both surfaces. Insert fully with a quarter turn to distribute adhesive evenly. Misaligned cuts, insufficient cement or premature pressure testing are the usual causes of joint leakage.

Highlights

  • 45-degree turn routes pipe around obstacles smoothly
  • Hub-to-hub solvent-weld joint seals without threads
  • Schedule 40 wall handles 180 °F continuous service
  • ABS construction resists impact down to −40 °F
  • Meets ASTM D3965 cell class 32222 for code compliance

Specifications

BrandMUELLER INDUSTRIES

Questions about this item

Does the Schedule 40 hub connection stay leak-free when the system runs continuously at the 180 °F upper limit?

The ABS material and Cell Class 32222 rating per ASTM D3965 are designed for the full -40 °F to 180 °F range, so the hub joints maintain integrity during sustained high-temperature operation.

What pipe size and material must I already have for this 2 in hub-by-hub elbow to fit?

You need 2-inch ABS pipe cut to accept a Schedule 40 hub connection on both ends of the 45-degree bend.

Will this Schedule 40 ABS elbow join cleanly to older ABS pipe that was installed under earlier ASTM standards?

Yes — the fitting meets ASTM D3965 Cell Class 32222, which is compatible with existing ABS piping systems built to the same material specification.

More in Fittings & Couplings

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.