Value Brand
Value Brand 41R250 Welding Rod 1/16" 36" 10 lb AWS R60
Carbon steel gas welding rods, 1/16 inch diameter and 36 inches long, AWS R60 classification, 10 lb pack
- TypeWelding Supplies
- Carbon steel rod for strong carbon-to-carbon welds
- 1/16 inch diameter suits precise gas welding tasks
- 36 inch length gives good reach and control
- AWS R60 classification meets 60 ksi tensile requirements
- 10 lb pack provides ample supply for projects
Carbon Steel Welding Rods for Flat
These rods are made for gas welding of carbon steel to carbon steel or low-alloy steel in flat and horizontal positions. They suit repair shops and fabrication jobs that use R60 classified filler metal. The 10 lb package provides enough length for multiple small to medium tasks.
Check Joint Design and Base Metal Before Ordering
Verify that the workpieces are carbon steel or low-alloy steel and that the joint can be welded in flat or horizontal position. The rods require a gas welding setup and are not intended for vertical or overhead passes. No flux or shielding gas is included with the rods.
10 lb Box Delivers Ready-to-Use Filler Lengths
Each rod measures 36 inches long with a 1/16 inch diameter, giving consistent feed and deposit rates. The bulk weight reduces how often you reload the holder during a shift. No additional accessories or software are bundled with this product.
Highlights
- Carbon steel rod for strong carbon-to-carbon welds
- 1/16 inch diameter suits precise gas welding tasks
- 36 inch length gives good reach and control
- AWS R60 classification meets 60 ksi tensile requirements
- 10 lb pack provides ample supply for projects
Specifications
| Brand | WESTWARD |
|---|---|
| Type | Welding Supplies |
Questions about this item
What comes in the 10 lb package of Value Brand 41R250 welding rods and is any extra equipment required?
The package contains 10 lb of 1/16 in diameter, 36 in long carbon steel rods classified AWS R60. A gas welding torch, fuel gas and oxygen supply, and standard personal protective equipment must be supplied separately.
How do I decide between the available diameters or lengths for this R60 series rod?
This listing is for the 1/16 in diameter by 36 in length variant only. Choose this size when joint access is tight and lower heat input is needed on carbon steel or low-alloy steel in flat or horizontal positions.
What does the 60 ksi tensile strength mean when I am actually welding with these rods?
The as-welded deposit meets a minimum 60 ksi tensile strength, so the finished weld on carbon steel to carbon steel or low-alloy steel joints will withstand that stress level in flat and horizontal positions.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
