Value Brand
Value Brand 41R221 14" Stick Electrode 1/8" AWS Wearcote 1 lb
14-inch hardfacing stick electrode for abrasion and impact resistance on carbon steel, cast iron and stainless steel
- TypeWelding Supplies
- Hardfacing extends part life with abrasion and impact resistance
- 14 in length suits flat and horizontal welding positions
- 1/8 in diameter works with AC and DCEN current
- 56 to 58 HRC hardness after welding resists wear
- 1 lb plastic tube stores electrodes for carbon steel and cast iron
14" Hardfacing Stick Electrode
This 14-inch stick electrode uses the Wearcote series for hardfacing applications. It is intended for flat and horizontal welding positions on carbon steel, cast iron, low-alloy steel, manganese steel, and stainless steel. The rod operates on AC or DCEN current and comes in a 1 lb plastic tube.
Who This Suits And Who Should Look Elsewhere
Welders needing a 1/8-inch diameter rod for abrasion and impact resistance on the listed base metals will find this suitable. Buyers requiring vertical or overhead welding positions should look at other products. Those needing a different diameter, alloy type, or container size must select an alternative electrode.
Key Specification Diameter And Hardness
The 1/8-inch overall diameter determines fit with your holder and amperage range. The as-welded Rockwell hardness of 56 to 58 HRC defines the wear resistance you will achieve. Verify both values match your procedure before purchase.
Highlights
- Hardfacing extends part life with abrasion and impact resistance
- 14 in length suits flat and horizontal welding positions
- 1/8 in diameter works with AC and DCEN current
- 56 to 58 HRC hardness after welding resists wear
- 1 lb plastic tube stores electrodes for carbon steel and cast iron
Specifications
| Brand | WESTWARD |
|---|---|
| Type | Welding Supplies |
Questions about this item
Will the 41R221 electrode work with my existing AC or DCEN stick welder?
Yes, the 41R221 is rated for both AC and DCEN welding current, so it will run on machines that provide either output.
How can I verify the 41R221 deposit has reached the specified 56 to 58 HRC hardness?
After welding, allow the bead to cool and test with a calibrated Rockwell C hardness tester; a reading between 56 and 58 HRC confirms the Wearcote deposit is performing as specified.
Does the 1 lb plastic tube contain only the 14 inch 1/8 inch electrodes or are accessories included?
The tube holds only the 14 inch, 1/8 inch diameter Wearcote electrodes; no additional accessories or consumables are packed inside.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
