Value Brand
Value Brand 4 in x 100 ft Rubber Water Discharge Hose 125 PSI
A 100 ft rubber water discharge hose rated 125 psi at 70 °F with a 375 psi burst pressure and a temperature range from -22 °F to 180 °F
- Handles demanding jobs with 125 psi working pressure
- Withstands extreme conditions from -22 to 180 degrees F
- Delivers reliable strength through 375 psi burst rating
- Covers large areas using 100 ft continuous length
- Resists wear with durable SBR tube and polyester cover
4-inch 100-foot water discharge hose
This 4-inch internal-diameter rubber hose runs 100 feet and is rated for 125 psi maximum working pressure at 70 degrees Fahrenheit. It suits contractors and facility crews moving large volumes of water across job sites or between tanks.
SBR tube with braided fiber reinforcement
The SBR inner tube resists abrasion while the braided fiber reinforcement and polyester cover handle a 375 psi burst pressure with a 3:1 safety factor. The bulk-hose configuration lets installers cut exact lengths and attach their own couplings without factory-fitted ends limiting layout options.
Temperature range from -22 to 180 degrees F
The hose remains flexible down to -22 degrees Fahrenheit and withstands continuous exposure up to 180 degrees Fahrenheit. It is not vacuum-rated, so it cannot be used for suction applications or where negative pressure occurs during extended pumping cycles.
Highlights
- Handles demanding jobs with 125 psi working pressure
- Withstands extreme conditions from -22 to 180 degrees F
- Delivers reliable strength through 375 psi burst rating
- Covers large areas using 100 ft continuous length
- Resists wear with durable SBR tube and polyester cover
Specifications
| Brand | ZORO SELECT |
|---|
Questions about this item
What is the maximum working pressure this hose can sustain at 70 degrees Fahrenheit?
The hose is rated for a maximum working pressure of 125 psi at 70 degrees Fahrenheit, with a 3:1 safety factor relative to its 375 psi burst pressure.
How does the hose construction manage heat during extended water discharge?
The SBR rubber tube handles fluid temperatures up to 180 degrees Fahrenheit, while the polyester cover and fiber braid reinforcement dissipate heat during continuous operation.
What fittings are required to connect this 4-inch ID hose to a pump?
You will need 4-inch inside diameter couplings or cam-lock fittings compatible with the 4 1/2-inch outside diameter and braided reinforcement.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
