Value Brand
Value Brand 3W560 Tarp 30 x 50 ft 5.1 mil Polyethylene Standard Duty Blue
Waterproof 30 by 50 foot polyethylene tarp with heat-sealed seams and aluminum grommets every 36 inches
- TypeTarps
- Waterproof polyethylene shields equipment from rain
- Heat-sealed seams and rope-reinforced edges resist tearing
- Aluminium grommets every 36 inches simplify secure tie-down
- Finished size 28 ft 10 in × 49 ft 2 in covers large areas
- Mildew and UV resistance extend outdoor lifespan
Value Brand 3W560 Tarp 30 x 50 ft
This polyethylene tarp measures 30 x 50 ft cut size and finishes at 28 ft 10 in x 49 ft 2 in. The 5.1 mil thickness and 3.4 oz/sq yd fabric weight provide standard duty protection. Heat sealed seams and rope reinforced edges add durability for outdoor coverage. Aluminum grommets spaced every 36 in allow secure tie down points.
Construction sites and equipment covers
The waterproof, mildew resistant and UV resistant material suits long term exposure. Builders needing a breathable cover or high visibility safety colours should look elsewhere. The standard duty rating limits use for heavy industrial abrasion or extreme wind loads. Buyers who want a lighter weight tarp for occasional use may prefer a thinner option.
Sustained outdoor deployment
Heat sealed seams resist delamination during prolonged rain and sun cycles. Rope reinforced edges distribute tension evenly across the 49 ft 2 in length. Aluminum grommets resist corrosion through repeated seasonal use. The polyethylene fabric maintains tear resistance across the full 28 ft 10 in width under continuous load.
Highlights
- Waterproof polyethylene shields equipment from rain
- Heat-sealed seams and rope-reinforced edges resist tearing
- Aluminium grommets every 36 inches simplify secure tie-down
- Finished size 28 ft 10 in × 49 ft 2 in covers large areas
- Mildew and UV resistance extend outdoor lifespan
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Tarps |
Questions about this item
What size grommets or tie-downs do I need for the 36 in spacing?
The aluminum grommets are spaced 36 in apart along the 28 ft 10 in by 49 ft 2 in finished edges, so standard tarp clips or bungee cords that fit 3/8 in grommets will work.
Will the 5.1 mil polyethylene hold up against the UV exposure on my older metal roof?
Yes, the tarp is UV resistant, mildew resistant, tear resistant and waterproof, so it can protect an older metal roof from sun and weather.
How can I confirm the tarp is the correct finished size after unfolding?
Measure the finished dimensions — they should read 28 ft 10 in wide by 49 ft 2 in long, which is smaller than the 30 x 50 ft cut size.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
