Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00937214BTC
In stock
Value Brand
Value Brand 32H974 1-1/4" FNPT Brass Ball Valve
Inline brass ball valve with stainless-steel ball rated 600 psi for air, oil, steam and water
- TypeOther
- Full-port design ensures unrestricted flow for air, oil, steam and water
- Brass body with stainless steel ball resists corrosion across multiple media types
- 600 psi operating pressure rating handles demanding plumbing applications
- Locking handle prevents accidental operation for added safety
- Vacuum service rated to 29 in Hg for versatile system compatibility
Product Identity
The Value Brand 32H974 is a 1-1/4 inch FNPT brass ball valve designed for inline flow control. It suits plumbers and facility managers who need a manual two-way shut-off for air, oil, steam or water lines.
Upgrade Path
This full-port valve replaces older reduced-port models that restrict flow and increase pressure drop. The jump is worth it when system efficiency demands unrestricted passage and a locking handle adds security against accidental operation.
Compatibility Check
Verify that your piping uses 1-1/4 inch FNPT threads and that operating pressures stay within 600 psi for general media or 150 psi for steam. Confirm the brass body and stainless steel ball suit the fluid chemistry and that a vacuum rating of 29 in Hg meets any suction requirements.
Highlights
- Full-port design ensures unrestricted flow for air, oil, steam and water
- Brass body with stainless steel ball resists corrosion across multiple media types
- 600 psi operating pressure rating handles demanding plumbing applications
- Locking handle prevents accidental operation for added safety
- Vacuum service rated to 29 in Hg for versatile system compatibility
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Other |
Questions about this item
What pipe size does the 1-1/4" FNPT brass ball valve connect to?
The valve has 1-1/4 inch female NPT threads on each end, so it screws onto matching male NPT pipe of the same nominal size.
How is the valve installed, and what step is often missed?
Apply PTFE tape or pipe sealant to the male threads, thread the valve on by hand, then tighten with a wrench on the hex flats; the step often missed is orienting the handle so it can move freely after the final turn.
What maintenance or replacement will the valve need later?
The stainless-steel ball and brass body are rated for 600 psi water, oil or air and 150 psi steam; if the PTFE seats wear and the valve no longer shuts off drip-tight, the entire two-piece valve is replaced rather than rebuilt.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
