We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PVC inline ball valve with tee handle and threaded ends

Value Brand

Value Brand 32H954 1/2" FNPT PVC Ball Valve

SKU CH-8EBC-R9TMB

Inline PVC ball valve with full-port design handles water at up to 150 psi using a tee handle

  • TypeOther
  • Full-port design gives unrestricted flow
  • PVC body resists corrosion in water lines
  • FKM seals and PTFE seats handle 150 psi pressure
  • Tee handle allows quick manual shut-off
  • California Proposition 65 chemical warning applies

Valve Body and Connection Details

This inline ball valve has a straight body style with a nominal size of one-half inch and a full port design. The side connection uses FNPT threading sized at one-half inch. It is constructed as a one-piece unit from PVC material for the body and ball. The handle is a tee type for manual two-way operation.

Media and Pressure Compatibility

The valve is rated for water media with a maximum operating pressure of 150 psi. Steam pressure and combustible gas pressure are not rated for this model. Buyers should verify that their system pressure does not exceed the stated limit and that the media is compatible with PVC construction and FKM seals. The seat material is PTFE which suits the intended water application.

Included Components and Compliance Notes

The unit ships as a single valve assembly with no additional accessories or software bundled. It carries a 3-A standard compliance status of not rated and an average surface roughness rating of not applicable. California Proposition 65 warnings apply for chemicals known to cause cancer and birth defects or reproductive harm. The item is not restricted from sale in any listed states.

Highlights

  • Full-port design gives unrestricted flow
  • PVC body resists corrosion in water lines
  • FKM seals and PTFE seats handle 150 psi pressure
  • Tee handle allows quick manual shut-off
  • California Proposition 65 chemical warning applies

Specifications

BrandZoro Select
TypeOther

Questions about this item

Does the 32H954 1/2" FNPT PVC ball valve include any fittings or pipe-sealant in the box?

The valve ships as a single one-piece PVC body with a tee handle and FKM seals; no extra fittings, tape or sealant are supplied.

When should I choose the 1/2" FNPT full-port version over a reduced-port alternative?

Select this 1/2" full-port model when you need unrestricted flow through a 1/2-inch female NPT connection in water lines rated to 150 psi.

How does the 150 psi pressure rating apply once the valve is installed in a household water system?

The 150 psi maximum operating pressure is the limit for cold-water service; do not exceed it and do not use the valve for steam or combustible gas.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.