Video Mount Products
Video Mount Products ERRS1032-50 Rack Screws 50 Pack
- 0.43
$8.99
0.00010426BTC
In stock
Value Brand
Value Brand 30LX05 Structural Pipe Fitting Cross Cast Iron 2 in
Cast-iron cross fitting joins four 2-inch pipes with corrosion-resistant zinc plating
- Cast-iron construction resists corrosion
- Zinc-plated finish adds extra protection
- Slip-on cross design simplifies pipe connections
- Fits 2-inch pipe with 2 3/8-inch outer diameter
- Overall length 6 3/4 inches for compact installations
Structural Pipe Fitting Cross 2 in
The Zoro Select 30LX05 is a cast-iron cross fitting designed to join four sections of 2-inch nominal pipe in a single junction. Its gray zinc-plated finish provides corrosion resistance for outdoor or damp environments. The slip-on design accepts pipe with an actual outer diameter of 2 3/8 inches and an inside diameter of 2 1/2 inches. Overall length measures 6 3/4 inches from end to end.
Suitable for installers building structural
This fitting suits plumbers, maintenance crews and fabricators assembling railings, shelters or pipe-based frameworks where four-way connections are required. The cast-iron construction handles mechanical loads but is not rated for high-pressure fluid systems. Installers needing threaded ends, welded joints or pressure-rated pipe components should select a different fitting type.
Slip-on cross for 2-inch nominal pipe
The critical specification is the slip-on cross configuration sized for 2-inch nominal pipe with a 2 3/8-inch actual outer diameter. This determines whether the fitting matches the pipe stock on site. California Proposition 65 warnings apply due to chemicals known to cause cancer and reproductive harm.
Highlights
- Cast-iron construction resists corrosion
- Zinc-plated finish adds extra protection
- Slip-on cross design simplifies pipe connections
- Fits 2-inch pipe with 2 3/8-inch outer diameter
- Overall length 6 3/4 inches for compact installations
Specifications
| Brand | Zoro Select |
|---|
Questions about this item
What pipe outer diameter does the 2 in slip-on cross accept?
The fitting is made for a 2 3/8 in actual pipe outer diameter.
What clearance is needed to mount this cross fitting?
Overall length is 6 3/4 in, so allow at least that much space in each direction.
How is the zinc-plated cast iron cross installed on the pipe?
Slip the fitting over the pipe until it seats fully; the common mistake is stopping short of the internal stop.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
