Video Mount Products
Video Mount Products ERRS1032-50 Rack Screws 50 Pack
- 0.43
$8.99
0.00010361BTC
In stock
Value Brand
Value Brand 30LW93 Structural Pipe Fitting Elbow Cast Iron 0.75 in
Cast iron ¾ in elbow fitting resists corrosion with zinc-plated finish
- Corrosion-resistant cast iron extends service life in outdoor structures
- Zinc-plated finish adds a protective layer against moisture and weather
- 3/4 in pipe size matches standard structural tubing for sheds
- 2 3/8 in overall length fits tight corner assemblies
- Prop 65 notice informs safe handling during installation
Zoro Select Cast Iron Elbow
This Zoro Select elbow fitting connects two sections of 0.75 inch pipe at an angle. The cast iron construction provides corrosion resistance for plumbing installations. Gray zinc-plated finish protects the surface from environmental exposure. Suitable for structural pipe fitting applications in residential or commercial systems.
For 3/4 inch pipe connections
Installers joining 3/4 inch nominal pipe with 1 1/8 inch actual outer diameter will find this elbow matches those dimensions. The 2 3/8 inch overall length fits standard spacing requirements. Buyers needing different pipe sizes, alternative materials, or straight couplings should select other fittings. This specific elbow does not adapt to other diameters or thread types.
3/4 inch nominal pipe size
The single specification determining compatibility is the 3/4 inch nominal pipe size with 1 1/8 inch actual outer diameter and matching inside diameter. Verify your pipe measures 1 1/8 inch outside diameter before purchasing. This fitting carries California Proposition 65 warnings for cancer and reproductive harm.
Highlights
- Corrosion-resistant cast iron extends service life in outdoor structures
- Zinc-plated finish adds a protective layer against moisture and weather
- 3/4 in pipe size matches standard structural tubing for sheds
- 2 3/8 in overall length fits tight corner assemblies
- Prop 65 notice informs safe handling during installation
Specifications
| Brand | Zoro Select |
|---|
Questions about this item
How does the 0.75 in pipe size translate when the fitting is installed?
The elbow accepts pipe with a 0.75 in nominal bore and an actual outer diameter of 1 1/8 in, giving a 2 3/8 in overall length once assembled.
What connection standard does the cast-iron elbow use and what does it limit?
It uses a standard NPT threaded connection, so the pressure rating is limited to the schedule of the mating pipe rather than the fitting itself.
What physical clearance is needed to mount the 93 model elbow?
Allow at least 2 3/8 in of straight run for the overall length plus wrench clearance around the 1 1/8 in outside diameter.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
