Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00941162BTC
In stock
Value Brand
Value Brand 3-Way Fire Hose Ball Valve 200 psi
Three-way brass ball valve splits a single 2 1/2 in fire-hose inlet into two 1 1/2 in male outlets at 200 psi
- TypeOther
- Divides single flow into two outlets with 3-way wye design
- Brass ball and body resist corrosion in fire hose service
- PTFE seats provide reliable sealing at 200 psi maximum pressure
- Steel lever handle with vinyl grip enables quick manual operation
- Female 2½ in NH inlet connects to standard fire hose couplings
3-Way Fire Hose Ball Valve
This brass-bodied valve splits a single 2 1/2 in female NH inlet into two 1 1/2 in male NH outlets. A steel-and-vinyl lever operates a 2-piece brass ball with PTFE seats for positive shut-off. It suits fire-service or industrial water-supply layouts that require flow division at the hose connection.
Sustained 200 psi operation
Rated for 200 psi maximum pressure, the valve maintains seal integrity during continuous service rather than only brief surge conditions. Brass stem and ball construction resists deformation under prolonged load, while PTFE seats reduce operating torque even after extended pressurisation. The 2-piece body allows in-line maintenance without removing the valve from the hose line.
NH thread practical limits
National Hose threads on the inlet and outlets dictate compatible couplings and adapters; the 2 1/2 in and 1 1/2 in sizes fix the flow area and cannot be changed without additional fittings. Overall length of 6 5/16 in sets the installed envelope in a hose rack or cabinet. California Proposition 65 warnings apply to chemicals present in the product materials.
Highlights
- Divides single flow into two outlets with 3-way wye design
- Brass ball and body resist corrosion in fire hose service
- PTFE seats provide reliable sealing at 200 psi maximum pressure
- Steel lever handle with vinyl grip enables quick manual operation
- Female 2½ in NH inlet connects to standard fire hose couplings
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Other |
Questions about this item
How much pressure can the brass body and PTFE seats handle during continuous fire-hose use?
The valve is rated for a maximum working pressure of 200 psi, with a brass body, brass ball, brass stem and PTFE seats designed to hold that pressure in sustained service.
Which existing hose threads must match the 2 1/2-inch female NH inlet and 1 1/2-inch male NH outlets?
The inlet requires a 2 1/2-inch male NH thread, while each outlet accepts a 1 1/2-inch female NH thread, so your supply and discharge hoses must carry those National Hose couplings.
Will the steel-and-vinyl lever handle operate smoothly alongside older brass gate valves on the same manifold?
The lever handle provides quarter-turn operation on a brass stem, allowing quick open or close without the multi-turn effort typical of older gate valves sharing the same line.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
