Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00939976BTC
In stock
Value Brand
Value Brand 3/8" FNPT Brass Union Class 150 1200 psi
A brass pipe union with FNPT connections rated for 1200 psi and temperatures from -65 to 250 degrees F
- TypeOther
- Brass construction resists corrosion for long service life
- Class 150 rating supports 1200 psi working pressure
- FNPT threads enable quick, tool-free pipe connections
- Wide -65 °F to 250 °F temperature range suits varied systems
- Meets ASA, ASME and SAE standards for reliable performance
Brass Union for 3/8" FNPT Piping
This brass union connects two sections of 3/8 inch FNPT pipe in residential or light-commercial plumbing systems. The Class 150 rating supports a maximum pressure of 1200 psi. It is intended for installers who need a removable joint that can be taken apart without cutting the pipe. Buyers who require a permanent soldered or welded connection will not use this fitting.
Class 150 Pressure Rating at 1200 psi
The single specification that decides fit is the Class 150 designation combined with a 1200 psi maximum pressure limit. This rating determines whether the union can handle the system’s working pressure without leaking or deforming. Verify that your application stays within this limit before installation. Systems exceeding 1200 psi require a higher-class fitting.
Temperature Range -65 to 250 Degrees F
Under sustained load the brass body operates continuously between -65 and 250 degrees Fahrenheit. The material maintains its seal and structural integrity across this span without the softening or embrittlement seen in short-term extremes. California Proposition 65 warnings apply for cancer and reproductive-harm substances present in the alloy.
Highlights
- Brass construction resists corrosion for long service life
- Class 150 rating supports 1200 psi working pressure
- FNPT threads enable quick, tool-free pipe connections
- Wide -65 °F to 250 °F temperature range suits varied systems
- Meets ASA, ASME and SAE standards for reliable performance
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Other |
Questions about this item
How does the 1200 psi rating translate once the union is installed in a plumbing system?
The union is rated for a maximum working pressure of 1200 psi at the stated temperature range of -65 to 250 degrees F.
What does the Class 150 designation mean for the FNPT threads in practice?
Class 150 indicates the fitting conforms to ASA, ASME and SAE standards for 150 lb pressure class pipe fittings.
What pipe size and thread type are required to connect this brass union?
It requires 3/8 inch pipe with FNPT (Female National Pipe Thread) connections on both ends.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
