We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small brass inline mini ball valve with nylon wedge handle

Value Brand

Value Brand 3/8" Brass Mini Ball Valve Inline

SKU CH-6CTA-XQB7R

Controls water flow in 3/8 inch lines with a brass body rated to 1500 psi and temperatures from -40 to 300 degrees Fahrenheit

  • TypeOther
  • 3/8 in compression connections for quick inline installation
  • Brass body with chrome-plated ball resists corrosion
  • PTFE seats and seals handle 1500 psi CWP
  • Blowout-proof stem and nylon wedge handle ensure safe operation
  • Rated from -40 to 300 °F for wide temperature range

Compact Brass Mini Ball Valve

The Value Brand 3/8" brass mini ball valve is an inline shut-off component built for compressed air, water, oil and other compatible fluids. Its two-piece brass body with chrome-plated brass ball and PTFE seats delivers a standard-port flow path in a compact footprint. The blowout-proof brass stem and nylon wedge handle are rated for service from -40 to 300 degrees F at up to 1500 psi CWP.

Compression Ends Simplify Installation

Compression-by-compression connections on 3/8 inch pipe and tube eliminate the need for threading tools or solder, cutting assembly time in tight mechanical rooms or OEM skids. The PTFE body seal reinforces joint integrity without additional tape or compound. No software, actuators or mounting hardware are included; the valve is a manual, standalone fitting.

Pressure and Temperature Headroom

At 1500 psi CWP the valve comfortably handles typical pneumatic and hydraulic circuits well below that ceiling, while the -40 to 300 degree F range covers most industrial ambient and fluid conditions. It is not suited for applications exceeding the rated pressure, temperatures outside the stated window, or media that attack brass, PTFE or nylon. Buyers needing larger port sizes, different end connections or automated actuation must select another model.

Highlights

  • 3/8 in compression connections for quick inline installation
  • Brass body with chrome-plated ball resists corrosion
  • PTFE seats and seals handle 1500 psi CWP
  • Blowout-proof stem and nylon wedge handle ensure safe operation
  • Rated from -40 to 300 °F for wide temperature range

Specifications

BrandZORO SELECT
TypeOther

Questions about this item

How often should I replace the PTFE seats in this 3/8" brass mini ball valve?

The PTFE seats and body seals are rated for the full temperature range of -40 to 300 degrees F and 1500 psi CWP; inspect annually and replace if leakage appears at the stem or ports.

What pressure limit will I hit first if I run this valve continuously at high pressure?

The maximum working pressure is 1500 psi CWP; sustained operation at or above that rating will exceed the valve's design limit before any other factor.

Will the nylon wedge handle get too hot to touch if the valve runs at 300 degrees F all day?

At the maximum temperature of 300 degrees F the nylon handle will become very hot; use a tool or insulated glove to operate it after prolonged exposure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.