We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanised steel pipe nipple, threaded both ends, 6 inch length

Value Brand

Value Brand 3/4" MNPT x 6" TBE Galvanized Steel Pipe Nipple Sch 40

SKU CH-680D-KF96G

Galvanized steel nipple with 3/4 inch MNPT threads and six-inch length for air, gas or potable water at 300 psi

  • Corrosion-resistant galvanized coating extends service life
  • Schedule 40 steel handles 300 psi at 150°F
  • 3/4" MNPT threads fit standard piping systems
  • 6-inch TBE length suits common plumbing runs
  • Electric resistance weld ensures consistent joint strength

3/4" Schedule 40 Galvanized Steel Nipple

This 3/4 inch nominal pipe size nipple connects air, gas or potable water lines in Schedule 40 systems. It is manufactured from corrosion-resistant galvanized steel with an electric resistance welded construction. The fitting carries a maximum operating pressure of 300 psi at 150 degrees Fahrenheit and a steam rating of 150 psi at 350 degrees Fahrenheit. It is globally sourced and compliant with Proposition 65 warnings for California.

Six-Inch Overall Length and Threaded Ends

The nipple measures six inches overall with male NPT threads on both ends for direct assembly into compatible fittings. Its outside diameter is 1 3/64 inches, matching Schedule 40 dimensions for 3/4 inch pipe. The welded steel body provides structural integrity up to the rated pressures. It is not intended for applications exceeding 300 psi water or 150 psi steam service.

Galvanized Coating Handles Standard Plumbing

The galvanized finish resists corrosion in typical air, gas and water installations without additional insulation or coating. No moving parts or power are involved, so the component adds no noise or heat to the system. Pressure drop across the short length is negligible for the rated flow capacities. The steel construction maintains strength across the full temperature range up to 350 degrees Fahrenheit.

Highlights

  • Corrosion-resistant galvanized coating extends service life
  • Schedule 40 steel handles 300 psi at 150°F
  • 3/4" MNPT threads fit standard piping systems
  • 6-inch TBE length suits common plumbing runs
  • Electric resistance weld ensures consistent joint strength

Specifications

BrandZORO SELECT

Questions about this item

Will the 3/4" MNPT threads on this Schedule 40 nipple match my existing galvanized fittings?

Yes, the 3/4 inch male NPT threads follow the Schedule 40 standard, so they thread directly into compatible galvanized couplings, elbows or tees you already have.

How can I verify the nipple is holding pressure after I install it?

Pressurise the line up to the rated 300 psi at 150 °F for air, gas or potable water, or 150 psi at 350 °F for steam, and check for leaks at every joint.

Does the 6-inch nipple come with any sealant, gaskets or protective caps?

The box contains only the single welded steel nipple with its galvanized coating; thread sealant, tape or caps must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.