Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00933729BTC
In stock
Value Brand
Value Brand 3/4" MNPT x 2" TBE Brass Long Pipe Nipple PK5
Pack of five brass nipples with 3/4 inch MNPT threads and two inch length for air, gas, oil or steam lines up to 1200 psi
- TypeOther
- Brass construction resists corrosion for long service life
- 1200 psi rating handles high-pressure air, gas, oil and steam
- Seamless design eliminates leak paths across temperature extremes
- 3/4 in NPT threads connect directly to Class 125 fittings
- Pack of five simplifies stocking for maintenance jobs
Brass pipe nipple for air and gas lines
This brass nipple connects components in air, natural gas, non-potable water, oil and steam systems. It meets Class 125 fitting compatibility and carries a maximum operating pressure of 1200 psi at temperatures up to 250 degrees F. The seamless C38500 brass construction withstands a minimum operating temperature of -65 degrees F. The pack contains five pieces for multiple installations.
Verify thread size and media compatibility
Confirm that your existing piping uses 3/4 inch nominal pipe size with male NPT threads before ordering. The nipple has an inside diameter of 53/64 in and an overall length of 2 in. Ensure the system pressure does not exceed 1200 psi and that the conveyed fluid is compatible with brass. This item is not intended for potable water applications.
Fits Class 125 brass or bronze fittings
The nipple threads directly into Class 125 compatible fittings without adapters. Its seamless construction eliminates potential leak paths found in welded alternatives. The brass material resists corrosion in the listed media, freeing the installer from additional protective coatings. California Proposition 65 warnings apply due to chemical content.
Highlights
- Brass construction resists corrosion for long service life
- 1200 psi rating handles high-pressure air, gas, oil and steam
- Seamless design eliminates leak paths across temperature extremes
- 3/4 in NPT threads connect directly to Class 125 fittings
- Pack of five simplifies stocking for maintenance jobs
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Other |
Questions about this item
What comes in the pack and do I need to buy thread sealant separately?
The pack contains five brass nipples with 3/4 inch MNPT threads on each end. Thread sealant or tape is not included and must be purchased separately.
Which fitting class matches the 125 rating shown in the specs?
The nipples are rated for Class 125 compatibility, so they suit standard 125 lb flanges and fittings used in low-pressure piping systems.
What does the 1200 psi pressure rating mean when the nipple is installed in a steam line?
The 1200 psi rating is the maximum steam pressure the seamless brass nipple can handle at temperatures up to 250 degrees F.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
