We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass reducing adapter with threaded ends, hexagonal body

Value Brand

Value Brand 3/4" FNPT x 1/2" MNPT Brass Reducing Adapter

SKU CH-YM5P-KHYFZ

Brass reducing adapter connects 3/4" female to 1/2" male NPT threads, rated to 1200 psi and -65 to 250 °F

  • TypeOther
  • Reduces pipe diameter with 3/4" FNPT to 1/2" MNPT connection
  • Brass construction meets SAE and ASME standards for durability
  • Class 150 rating supports up to 1200 psi working pressure
  • Operates reliably from -65 to 250 degrees Fahrenheit
  • California Proposition 65 warning for cancer and reproductive harm chemicals

Pipe size and connection type

This brass reducing adapter connects a three-quarter inch female NPT thread to a one-half inch male NPT thread. It is built to Class 150 specifications and carries SAE and ASME standards compliance. The fitting suits plumbing and fluid-handling systems that require a step-down in pipe diameter.

Pressure rating and temperature range

The adapter withstands a maximum pressure of 1200 psi across an operating window from minus 65 degrees to 250 degrees Fahrenheit. Brass construction provides corrosion resistance for water, air and compatible fluid lines. No moving parts mean silent operation and no power draw.

Upgrading from mismatched threads

This part replaces improvised bushings or mismatched couplings that risk leaks at the joint. The jump is worth it when a system demands a code-compliant, rated transition between the two listed pipe sizes. It does not suit installations that require a different thread standard, a larger step change or a non-brass material.

Highlights

  • Reduces pipe diameter with 3/4" FNPT to 1/2" MNPT connection
  • Brass construction meets SAE and ASME standards for durability
  • Class 150 rating supports up to 1200 psi working pressure
  • Operates reliably from -65 to 250 degrees Fahrenheit
  • California Proposition 65 warning for cancer and reproductive harm chemicals

Specifications

BrandZORO SELECT
TypeOther

Questions about this item

How do I install the 3/4" FNPT x 1/2" MNPT brass reducing adapter without damaging the threads?

Wrap PTFE tape clockwise on the 1/2" MNPT threads only, then hand-tighten into the female port before a final quarter-turn with a wrench; over-tightening the brass Class 150 fitting cracks the female thread.

What maintenance or replacement will the brass reducing adapter need over time?

Inspect the FNPT and MNPT joints annually for green patina or seepage; replace the adapter if dezincification appears or if the 1200 psi rating can no longer be verified after thermal cycling.

At what temperature limit does the brass reducing adapter first lose its 1200 psi pressure rating during sustained use?

The 1200 psi rating holds up to 250 °F; above that temperature the brass softens and the Class 150 pressure boundary is exceeded first.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.