We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze copper reducing tee with three connections, two cup ends and one threaded end

Value Brand

Value Brand 24W594 Copper Reducing Tee 3/4" C x 1/2" FNPT

SKU CH-87W0-WAS6Z

Copper reducing tee joins 3/4 inch tube to 1/2 inch FNPT with rolled centre stop

  • ColorBronze
  • TypePipes, Valves & Fittings
  • Reduces 3/4 in copper tube to 1/2 in FNPT for flexible tubing systems
  • Precleaned and sandblasted for reliable sweat fitting joints
  • Cast copper construction with rolled centre stop for secure assembly
  • Cup connections on both run ends suit 3/4 in copper tube
  • Ships free on orders of $75 or more

Copper Reducing Tee for Tubing Systems

This Value Brand copper reducing tee connects 3/4-inch copper tubing on two ends and a 1/2-inch FNPT thread on the third. It is designed for sweat fitting installation in residential and light commercial tubing systems.

Precleaned Sandblasted Finish with Center Stop

The fitting arrives precleaned, sandblasted and bagged so flux and solder adhere quickly without extra preparation. A rolled center stop inside the tee ensures the tube seats at the correct depth during assembly.

Handles Standard Copper Tubing Connections

The cast copper body accommodates 3/4-inch copper tube size on the run and 1/2-inch copper tube size on the branch with a 1/2-inch FNPT outlet. It is not suited for high-pressure gas lines or applications requiring flared or compression fittings.

Highlights

  • Reduces 3/4 in copper tube to 1/2 in FNPT for flexible tubing systems
  • Precleaned and sandblasted for reliable sweat fitting joints
  • Cast copper construction with rolled centre stop for secure assembly
  • Cup connections on both run ends suit 3/4 in copper tube
  • Ships free on orders of $75 or more

Specifications

BrandZORO SELECT
ColorBronze
TypePipes, Valves & Fittings

Questions about this item

Will the 3/4" copper cup ends need re-soldering if the joint leaks later?

The precleaned, sandblasted cup ends are made for sweat soldering; a leaking joint is normally cut out and resoldered with fresh flux and solder.

What pressure or temperature limit will the cast copper tee reach first in continuous hot-water service?

Cast copper handles typical residential hot-water temperatures and pressures; the 1/2" FNPT branch usually governs the practical limit before the copper body does.

Does the tee add noticeable heat loss or noise when the system runs all day?

The bronze-coloured copper body conducts heat like any copper fitting and adds no mechanical noise; insulation wrap is used if heat retention is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.