Value Brand
Value Brand 24T962 Repair Clamp 4in Partial Coverage 6in Length
Stainless-steel repair clamp with nitrile gasket seals 4 in pipe at up to 150 psi
- Repairs 4 in pipe with partial coverage
- Stainless steel 304 construction resists corrosion
- Two steel bolts secure the clamp
- Nitrile rubber gasket seals up to 150 psi
- 6 in length covers the damaged section
4-inch repair clamp for partial pipe coverage
The ZORO SELECT 24T962 repair clamp fits pipe with a 4-inch nominal size and a maximum outside diameter of 4 1/2 inches. Its stainless steel body uses Grade 304 material for corrosion resistance. The nitrile rubber gasket provides a seal over a partial coverage area. Two steel bolts secure the assembly around the damaged section.
Sustained pressure performance up to 150 psi
The clamp is rated for a maximum operating pressure of 150 psi and a maximum vacuum pressure of 150. This rating applies to continuous service conditions rather than brief spikes. The Grade 304 stainless steel construction maintains structural integrity under prolonged loading. The two-bolt design distributes clamping force evenly to prevent gasket extrusion over time.
Partial gasket coverage limits sealing area
The gasket covers only a portion of the pipe circumference, so the clamp suits localised leaks or cracks rather than full-circumference failures. Buyers needing to seal a complete pipe break or a large corroded zone should select a full-coverage model. The 6-inch overall length defines the maximum axial extent of the repair zone. Verify that the defect fits within this window before ordering.
Highlights
- Repairs 4 in pipe with partial coverage
- Stainless steel 304 construction resists corrosion
- Two steel bolts secure the clamp
- Nitrile rubber gasket seals up to 150 psi
- 6 in length covers the damaged section
Specifications
| Brand | ZORO SELECT |
|---|
Questions about this item
How much pressure can the 304 stainless clamp with nitrile gasket hold during continuous service?
The clamp is rated for a maximum operating pressure of 150 psi and a maximum vacuum pressure of 150.
What pipe size and bolt hardware are required to install this 4 in repair clamp?
It fits 4 in pipe with a 4 1/2 in outside diameter and uses two steel bolts included with the clamp.
Will the partial-coverage nitrile gasket seal older galvanised or copper pipe with the same 4 1/2 in OD?
Yes, the clamp is designed for 4 in nominal pipe with a 4 1/2 in outside diameter regardless of pipe material.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor 70204 Acrylic Coated Polyester Gray Hot Shot BoatGuard Boat Cover
- Transparent
BoatBuckle F12071 Kwik-Lok Gunwale Tie-Down Stainless Steel
- Transparent



