We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel repair clamp with single bolt for 2 inch pipe

Value Brand

Value Brand 24T950 Repair Clamp Single Bolt 2 In 304 SS

SKU CH-B59Y-4RHHF

A single-bolt stainless steel repair clamp with nitrile gasket rated for 150 psi on 2-inch pipe

  • Single-bolt design simplifies installation on 2 in pipe
  • 304 stainless steel body resists corrosion in harsh environments
  • Nitrile rubber gasket seals reliably up to 150 psi
  • Partial gasket coverage targets the leak area precisely
  • Steel bolt provides strong clamping force for secure repairs

Repair clamp for two-inch pipe

This single-bolt clamp fits a 2 in pipe with an outside diameter of 2 3/8 in. The 304 stainless steel band and nitrile rubber gasket provide a seal rated to 150 psi pressure and 150 vacuum. It is designed for maintenance crews who need a quick, permanent fix on water or air lines.

Thermal and pressure performance

The nitrile gasket maintains its seal across the full 150 psi working range without extruding. Stainless construction resists corrosion from condensation and ground moisture, so the clamp does not degrade or loosen under normal temperature cycles. One steel bolt delivers even clamping force with minimal installation torque.

Build integration and clearance

Partial gasket coverage allows the clamp to slide over the pipe without removing fittings, freeing time on live systems. The single-bolt design needs only a standard wrench and a few centimetres of radial space, so it fits in tight trenches or behind equipment racks. No special tools or pipe preparation are required.

Highlights

  • Single-bolt design simplifies installation on 2 in pipe
  • 304 stainless steel body resists corrosion in harsh environments
  • Nitrile rubber gasket seals reliably up to 150 psi
  • Partial gasket coverage targets the leak area precisely
  • Steel bolt provides strong clamping force for secure repairs

Specifications

BrandZORO SELECT

Questions about this item

How do I install the single-bolt 2 in repair clamp and what step is often missed?

Centre the 304 stainless-steel band over the 2 3/8 in pipe, seat the nitrile-rubber gasket squarely, then tighten the steel bolt evenly; the step often missed is checking that the gasket stays fully seated while torqueing the bolt.

What maintenance or replacement will the clamp need later?

Inspect the nitrile-rubber gasket periodically for cracking or compression set and replace the gasket if leaks appear; the 304 stainless-steel band and steel bolt generally do not require replacement unless damaged.

What limit appears first under sustained pressure?

The 150 psi maximum operating pressure is the first limit reached under sustained use; exceeding it can unseat the partial-coverage gasket and cause leakage.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.