Value Brand
Value Brand 24M160 Protrude Indicator Light Red 120VAC
A 16 mm panel-mount LED indicator glows red at 110–120 VAC with a 100,000-hour rated life
- Engine BrandZORO SELECT
- Engine Size16mm Mounting dia
- Bright red LED gives clear status at a glance
- 120 V AC operation suits standard industrial panels
- 16 mm mounting diameter fits common cut-outs
- 100,000 hour average life reduces replacement frequency
- IP40 rating protects against solid particles
Industrial LED Indicator Light
The ZORO SELECT protruding indicator light provides a red visual signal for 110V AC control panels and machinery. Its 16mm mounting diameter suits standard industrial cut-outs. The brass plated chrome bezel and ABS plastic body meet ROHS standards. This component is intended for maintenance engineers and panel builders adding or replacing a single status light.
Verify Panel Thickness and Voltage
Confirm the panel material is no thicker than 0.160 in so the 16mm thread seats correctly. Ensure the supply is 110V AC; the unit draws 4.4 mA and is not rated for other voltages. The male electrical connector requires a matching female receptacle. The IP40 rating means the front face is protected against solid objects but not against water ingress.
Steady Low Current Operation
At 4.4 mA the LED runs continuously without measurable heat build up. The average life is quoted at 100,000 hours under constant 110V AC excitation. Light output remains stable over that period because the driver is integrated into the protruding housing. No duty cycle limit or cooling provision is needed for sustained panel use.
Highlights
- Bright red LED gives clear status at a glance
- 120 V AC operation suits standard industrial panels
- 16 mm mounting diameter fits common cut-outs
- 100,000 hour average life reduces replacement frequency
- IP40 rating protects against solid particles
Specifications
| Engine Brand | ZORO SELECT |
|---|---|
| Engine Size | 16mm Mounting dia |
Questions about this item
Does the 16 mm mounting diameter LED indicator include any wiring or connector hardware in the box?
The unit ships as a single 16 mm protruding indicator light with male 110 connector terminals; no separate wiring, panel gasket or mounting nut is included.
Should I choose the 120 V AC rated version or a lower-voltage model for a standard mains panel?
This indicator is rated for 110 V AC operation and draws 4.4 mA, making it suitable for typical 120 V AC mains panels without additional resistors.
What does the 100 000 hour average life mean for a panel that runs continuously?
At continuous operation the red LED is rated to last roughly 11 years before reaching its average life endpoint.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Crivon No Clean Rosin Flux Syringe + Solder Wick Braid Kit
- Out-Opening, Narrow…
- 1 Year
Zoro Select 60" x 28" Equipment Cover 1 mil Clear PK 150
- Packing Peanuts & F…
Zoro Select 9LAP2 Poly Tubing 22 in x 1075 ft 4 mil Clear
- Packing Peanuts & F…



