We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper compression lug, long barrel, one hole, 3/8 inch stud

Value Brand

Value Brand 24D008 Compression Lug 300 kcmil 3/8 in Stud Long

SKU CH-YGPA-MZD2G

A copper compression lug for 300 kcmil stranded wire with a 3/8 in stud, long barrel, seamless seam, UL listed, rated to 35 kV and 257 Degrees F

  • TypeElectrical Connectors
  • 35 kV rating supports high-voltage applications
  • Seamless copper barrel ensures reliable conductivity
  • Long barrel design fits 300 kcmil stranded wire
  • UL Listed for code-compliant installations
  • 3/8 in stud with straight tongue simplifies mounting

300 kcmil Copper Compression Lug

This Value Brand compression lug is a single-hole copper connector rated for 300 kcmil stranded copper wire. It features a 3/8 inch stud hole, a long barrel and a seamless crimp design. The connector carries a UL listing and a maximum voltage rating of 35 kV.

Installers needing a 300 kcmil straight lug

Electricians terminating a single 300 kcmil copper conductor to a 3/8 inch stud will find this lug matches the spec. It is not suited for smaller wire sizes, multi-hole mounting patterns or applications requiring an inspection window in the barrel.

Long-barrel seamless crimp under load

The seamless barrel and long barrel length distribute crimp force evenly across the full 300 kcmil conductor. Rated to 257 degrees F maximum operating temperature, the copper body maintains conductivity during sustained high-current cycles without a seam to fatigue.

Highlights

  • 35 kV rating supports high-voltage applications
  • Seamless copper barrel ensures reliable conductivity
  • Long barrel design fits 300 kcmil stranded wire
  • UL Listed for code-compliant installations
  • 3/8 in stud with straight tongue simplifies mounting

Specifications

BrandZORO SELECT
TypeElectrical Connectors

Questions about this item

What crimping die code is required to terminate the lug properly?

Use die code 66 with a compatible crimping tool to form the connection on the seamless copper barrel.

Will the 1.19 inch tongue width fit the existing 3/8 inch stud on my bus bar?

Yes, the lug is drilled for a 3/8 inch stud and the tongue measures 1.19 inches wide for that hardware.

How can I verify the crimp meets the UL listing after installation?

Inspect the crimp for full die impression and measure barrel compression; the lug carries a UL listing when crimped with the correct die.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.