We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass threaded thermowell with straight shank, 4 inch insertion length

Value Brand

Value Brand 24C470 Bimetal Thermowell Brass 1/2 NPSM 4 in

SKU CH-CGV2-8ZAVK

A brass thermowell with a 4-inch insertion length protects temperature sensors in threaded pipe connections up to 150 degrees F at 3170 psi

  • TypeEnvironmental & Mechanical
  • Brass construction resists corrosion in industrial environments
  • 4 in insertion length suits standard process connections
  • 1/2 NPSM thread fits common sensor fittings
  • Rated 150 °F at 3170 psi for high-pressure service
  • Rated 350 °F at 2930 psi for elevated-temperature service

Brass thermowell for industrial temperature sensing

This brass thermowell protects bimetal thermometers in process piping and vessels. The straight shank and 3/4 inch MNPT threads suit standard instrument connections. It is built for technicians and plant engineers who need reliable temperature measurement in water, oil or steam service.

Pressure rating drops as temperature rises

At 150 degrees F the thermowell withstands 3170 psi, while at 350 degrees F the rating falls to 2930 psi. The four inch insertion length reaches the flow stream for accurate readings under sustained operating conditions. Brass construction resists corrosion in non-aggressive media.

Threaded mounting simplifies installation

The 3/4 inch male pipe thread fits existing fittings without welding. Brass material allows easier thread engagement than stainless alternatives and reduces galling during maintenance. California Proposition 65 warnings apply because the alloy contains listed chemicals.

Highlights

  • Brass construction resists corrosion in industrial environments
  • 4 in insertion length suits standard process connections
  • 1/2 NPSM thread fits common sensor fittings
  • Rated 150 °F at 3170 psi for high-pressure service
  • Rated 350 °F at 2930 psi for elevated-temperature service

Specifications

BrandZoro Select
TypeEnvironmental & Mechanical

Questions about this item

How hot can the brass thermowell run continuously without exceeding its pressure rating?

It is rated for 150 °F at 3170 psi and 350 °F at 2930 psi, so the maximum safe temperature depends on the system pressure you apply.

What thread size must my process connection have for this thermowell to seal properly?

The thermowell has a 3/4 in MNPT external thread, so your fitting needs a matching 3/4 in FNPT port.

Will the 4-inch insertion length reach the flow stream in my existing 3-inch pipe tee?

With a 4 in insertion length the tip extends 4 inches from the mounting face; verify your tee geometry to confirm it reaches the centre of the stream.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.