We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper two-hole compression lug, brown finish, straight tongue, inspection hole visible

Value Brand

Value Brand 24C442 Two-Hole Compression Lug 500 kcmil 3/8 in Stud Short

SKU CH-GBP6-8Q2H8

Two-hole copper compression lug for 500 kcmil stranded wire with 3/8 in stud holes, UL Listed, 35 kV rating

  • TypeElectrical Connectors
  • Two-hole design provides secure mounting on 1 in centres
  • 500 kcmil copper conductor fits maximum wire size
  • 3/8 in stud hole matches common terminal hardware
  • Seamless copper barrel rated to 35 kV and 257 °F
  • UL Listed with inspection hole for visual crimp verification

Two-Hole Copper Compression Lug

The ZORO SELECT 24C442 is a seamless copper compression lug rated for 500 kcmil stranded copper conductors. It features a straight tongue with a brown colour code and die code 87 for correct crimp tooling. The lug accepts a 3/8 inch stud and provides two mounting holes spaced one inch apart.

Suited for high-current copper terminations

This lug suits installers terminating 500 kcmil copper wire in panels or equipment rated up to 35 kV and 257 degrees Fahrenheit. The UL Listed component includes an inspection hole for visual verification. Buyers needing aluminium conductor compatibility or a different stud size should select an alternative lug.

Straightforward crimp installation

Installation requires a crimp tool matched to die code 87; the seamless barrel and inspection hole help confirm proper compression. The fixed two-hole pattern demands accurate hole alignment on the mounting surface. California Proposition 65 warnings apply due to chemicals known to cause cancer and reproductive harm.

Highlights

  • Two-hole design provides secure mounting on 1 in centres
  • 500 kcmil copper conductor fits maximum wire size
  • 3/8 in stud hole matches common terminal hardware
  • Seamless copper barrel rated to 35 kV and 257 °F
  • UL Listed with inspection hole for visual crimp verification

Specifications

BrandZORO SELECT
TypeElectrical Connectors

Questions about this item

What crimp tool and die code are required to terminate the 500 kcmil conductor in this lug?

Use a crimp tool that accepts die code 87 for the 500 kcmil copper barrel; the lug is seamless and UL listed for that conductor size.

Will the 1.61 in tongue width and 1 in hole spacing fit the 3/8 in stud pattern on my existing bus bar?

Yes, the straight tongue measures 1.61 in wide with holes centred 1 in apart, matching a standard 3/8 in two-hole bus-bar pattern.

How can I verify the crimp is sound after installation?

Check the inspection hole to confirm full conductor insertion, then ensure the crimp indent aligns with die code 87 and the lug seats flat on the stud.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.