We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper one-hole compression lug, short barrel, green color code, 3/8 inch stud

Value Brand

Value Brand 24C362 One-Hole Compression Lug 1 AWG 3/8 in Stud Short

SKU CH-ZGQ5-ABCFH

One-hole copper compression lug for 1 AWG stranded wire, 3/8 in stud, short barrel, 600 V AC, CSA and UL listed

  • TypeElectrical Connectors
  • Crimp termination ensures secure copper connections
  • One-hole design fits 3/8 in stud applications
  • Seamless barrel construction provides reliable conductivity
  • Green color code identifies 1 AWG wire size
  • UL listed and CSA certified for 600 V AC use

Application and fit

This one-hole compression lug connects a single 1 AWG stranded copper conductor to a 3/8 in stud. The straight tongue and 0.68 in width suit panel terminals and bus-bar work where space is limited. It is UL Listed and CSA Certified for 600 V AC service. The green colour code and die code 37 identify the correct crimp tool setting.

Sustained-load behaviour

Rated for continuous operation up to 300 Degrees F, the seamless copper barrel resists creep and oxidation during long duty cycles. The inspection hole lets an installer verify full conductor insertion before energising the circuit. Crimp termination creates a homogeneous metal bond that maintains low resistance under thermal cycling.

Interface limits

The lug accepts only 1 AWG stranded copper; smaller or larger conductors, solid wire or aluminium are outside the listed range. A single 3/8 in mounting hole fixes the tongue orientation, so the design cannot accommodate multi-hole patterns or angled tongues. Voltage is limited to 600 V AC per the certification standards.

Highlights

  • Crimp termination ensures secure copper connections
  • One-hole design fits 3/8 in stud applications
  • Seamless barrel construction provides reliable conductivity
  • Green color code identifies 1 AWG wire size
  • UL listed and CSA certified for 600 V AC use

Specifications

BrandZORO SELECT
TypeElectrical Connectors

Questions about this item

Does the 300 °F maximum operating temperature mean the lug runs hot during continuous use?

The 300 °F rating is the upper limit the copper lug can withstand without degrading; it does not generate heat itself, so temperature depends on the current carried by the 1 AWG conductor.

What crimping tool and die are required to terminate this 1 AWG lug?

Use a die coded 37 that matches the green colour code for 1 AWG copper; the tool must produce a seamless crimp on the short barrel.

Will this lug fit on a 3/8 in stud that already has a 0.68 in tongue-width connector?

Yes, the lug has a single 3/8 in stud hole and a straight tongue 0.68 in wide, so it matches that stud pattern.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.