We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper compression lug with long barrel and single 3/8 inch stud hole

Value Brand

Value Brand 24C325 One-Hole Compression Lug 1/0 AWG 3/8 in Stud Long

SKU CH-5YBK-KYYEJ

A copper compression lug for 1/0 AWG wire with a 3/8 in stud hole, long barrel and pink colour code

  • TypeElectrical Connectors
  • Handles high-voltage loads up to 35 kV
  • Seamless copper barrel resists cracking under compression
  • CSA and UL listings confirm code compliance
  • Long barrel design allows deeper crimp engagement
  • Pink colour code and die 42 simplify tool selection

One-Hole Compression Lug 1/0 AWG

The Value Brand 24C325 is a copper compression lug built for 1/0 AWG stranded copper conductors and a 3/8 in stud. It carries CSA and UL listings and is rated for 35 kV maximum voltage. Electrical contractors and maintenance technicians use it for permanent crimp terminations in panel work and heavy-gauge wiring.

Long Barrel Straight Tongue Design

The long barrel provides extra crimp length for secure mechanical grip on the conductor. A straight tongue with .75 in width aligns cleanly on bus bars or terminal blocks without offset. The seamless seam style eliminates a potential split line under vibration. No inspection hole is present, so visual verification of wire insertion must be done before crimping.

257 °F Continuous Operating Temperature

The lug withstands sustained heat up to 257 degrees Fahrenheit without degrading the copper or the crimp joint. Pink colour code and die code 42 identify the correct crimp tool setting for repeatable installations. California Proposition 65 warnings apply for cancer and reproductive harm. Buyers needing an inspection window or a two-hole mounting pattern should select a different lug style.

Highlights

  • Handles high-voltage loads up to 35 kV
  • Seamless copper barrel resists cracking under compression
  • CSA and UL listings confirm code compliance
  • Long barrel design allows deeper crimp engagement
  • Pink colour code and die 42 simplify tool selection

Specifications

BrandZORO SELECT
TypeElectrical Connectors

Questions about this item

How hot can the 24C325 lug get before it exceeds its 257 °F rating?

The lug is rated for a maximum operating temperature of 257 °F, so sustained loads should stay below that point.

Will the copper lug run warm enough to need extra cooling during all-day use?

At its rated current the copper body stays within the 257 °F limit, so no additional cooling is required.

What crimp tool and die do I need to terminate 1/0 AWG copper wire in this lug?

Use a crimp tool that accepts die code 42 (pink colour code) for 1/0 AWG stranded copper.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.