We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two square black steel pegboard panels 24 by 24 inches powder coated finish

Value Brand

Value Brand 24 in Square Pegboard Panel 2-Pack 300 lb 600 lb

SKU CH-TYQP-HX9XY

Two 24 in square steel pegboard panels with 3/8 in holes on 1 1/2 in centres, each rated for 300 lb and 600 lb together

  • Two 24 in panels give 4 sq ft of wall storage
  • Square 3/8 in holes on 1 1/2 in centres accept standard peg hooks
  • Each panel rated for 300 lb load capacity
  • Combined unit supports 600 lb for heavy tools
  • Powder-coated steel resists corrosion in workshop environments

ZORO SELECT 24 in Square Pegboard Panel 2-Pack

Two powder-coated steel panels each measure 24 by 24 inches with 3/8-inch square holes on 1-1/2-inch centres. Each panel carries 300 lb and the pair is rated for 600 lb total. Suited for garages, workshops or retail walls where a single-sided hook board is needed. Panels arrive unassembled without hooks included.

Replaces single light-duty boards or open wall space

The jump is worth it when you need a combined 600 lb load across four square feet of hanging area instead of scattered smaller boards. Not for buyers who want more storage than 4 sq ft per pack or who need double-sided panels for aisle mounting.

Holds rated load continuously without bowing

Powder-coated steel resists corrosion during long-term tool storage. Square holes keep hooks from rotating under sustained weight. Panels remain rigid at the full 300 lb per board rating over extended periods.

Highlights

  • Two 24 in panels give 4 sq ft of wall storage
  • Square 3/8 in holes on 1 1/2 in centres accept standard peg hooks
  • Each panel rated for 300 lb load capacity
  • Combined unit supports 600 lb for heavy tools
  • Powder-coated steel resists corrosion in workshop environments

Specifications

BrandZoro Select

Questions about this item

What wall spacing do the 1 1/2 in peg holes require for mounting brackets?

The square peg holes are spaced 1 1/2 in apart on centre, so mounting hardware must align with that grid across the 24 in width and height.

Which way round does the single usable side face during installation?

Only one side is usable; the powder-coated finish faces outward and the raw steel side sits against the wall, so hang the panel with the black surface visible.

When should the two panels be replaced if the 600 lb total load rating is regularly approached?

Inspect the steel for bending or coating wear at the hole edges; replace both panels together if deflection appears or the powder coat flakes around the 3/8 in square holes.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.