We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Nickel-plated brass 90-degree elbow fitting with 3/8 tube and 1/4 MNPT threads

Value Brand

Value Brand 22FR88 3/8" Tube x 1/4" MNPT Nickel Brass 90 Degree Elbow bathware

SKU CH-Z9T8-F29RY

Nickel-plated brass 90-degree elbow joins 3/8-inch tube to 1/4-inch MNPT, rated to 160°F

  • TypeOther
  • Nickel-plated brass resists corrosion
  • 90-degree elbow enables tight routing
  • 3/8-inch tube fits standard supply lines
  • 1/4-inch MNPT threads connect directly
  • Nitrile gasket seals up to 160 degrees F

Zoro Select 22FR88 90 Degree Elbow

This nickel plated brass elbow connects 3/8 inch tube to 1/4 inch male NPT threads. It suits plumbing repairs and bathware installations where a right angle turn is required. The fitting is new and ready for use in compatible systems.

Capacity and headroom

The elbow operates from 0 to 160 degrees Fahrenheit with a nitrile rubber gasket. It handles standard water supply pressures within this temperature range. Extreme heat or aggressive chemicals outside the rated limits will cause the seal or brass to degrade.

Build quality and daily implications

Nickel plated brass resists corrosion in typical bathroom environments. The 90 degree sweep allows tight routing against walls or vanities without kinking tubing. California Proposition 65 warnings apply due to chemical content.

Highlights

  • Nickel-plated brass resists corrosion
  • 90-degree elbow enables tight routing
  • 3/8-inch tube fits standard supply lines
  • 1/4-inch MNPT threads connect directly
  • Nitrile gasket seals up to 160 degrees F

Specifications

BrandZORO SELECT
TypeOther

Questions about this item

Will the 3/8" tube and 1/4" MNPT threads on this 90-degree elbow match my existing copper supply lines?

The elbow has a 3/8-inch tube connection on one side and a 1/4-inch male NPT thread on the other, so it joins those two specific sizes directly.

How can I confirm the nickel-plated brass fitting is sealed properly after installation?

Pressurise the line up to the 160-degree Fahrenheit temperature rating and check the nitrile rubber gasket for any moisture at the joint.

Does the 22FR88 package include thread sealant or additional gaskets for the 1/4" MNPT connection?

The box contains only the nickel-plated brass 90-degree elbow with its fitted nitrile rubber gasket; pipe tape or sealant for the male threads must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.