We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Nickel-plated brass 90-degree elbow with 1/4-inch tube and MNPT connection

Value Brand

Value Brand 22FR86 1/4" Tube x MNPT Nickel Brass 90 Degree Elbow

SKU CH-5599-K2CMK

A 1/4-inch tube-to-MNPT nickel-plated brass elbow rated for 160 degrees Fahrenheit

  • TypeOther
  • 90-degree elbow routes tubing in tight spaces
  • 1/4-inch tube and MNPT ends connect without adapters
  • Nickel-plated brass body resists corrosion in wet environments
  • Nitrile rubber gasket seals reliably from 0 to 160 degrees F
  • California Proposition 65 notice included for regulatory compliance

1/4" Nickel Brass Elbow for Tube Connections

The Value Brand 22FR86 fitting connects a 1/4 inch tube to a male NPT thread at a 90 degree angle. It is built from nickel plated brass with a nitrile rubber gasket. The component is rated for temperatures from 0 to 160 degrees F. It suits plumbing or fluid transfer systems needing a compact directional change.

Straightforward Threaded Installation

The elbow installs by threading the MNPT end into a matching female port and securing the tube side with a compatible compression nut. Leaks typically appear if the thread sealant is insufficient or the tube nut is not tightened to the correct torque. The nitrile gasket requires a clean, undamaged seating surface to seal properly. Over tightening the brass body can distort threads.

For 1/4 Inch Tubing Systems Only

This fitting suits installers working with 1/4 inch outer diameter tubing and male NPT threads. It will not fit metric tubing, larger pipe sizes, or female thread ports. Buyers needing a straight coupling, a different angle, or a material such as stainless steel should look at other fittings. The Prop 65 notice applies to the brass alloy used.

Highlights

  • 90-degree elbow routes tubing in tight spaces
  • 1/4-inch tube and MNPT ends connect without adapters
  • Nickel-plated brass body resists corrosion in wet environments
  • Nitrile rubber gasket seals reliably from 0 to 160 degrees F
  • California Proposition 65 notice included for regulatory compliance

Specifications

BrandZORO SELECT
TypeOther

Questions about this item

How do I confirm the 22FR86 elbow is sealing correctly after installation?

Pressurise the line up to the 160 °F temperature rating and check the 1/4 in tube and MNPT joints for leaks; the nitrile rubber gasket should hold without weeping.

What comes with the 22FR86 fitting and what must I supply?

The box contains the nickel-plated brass 90-degree male elbow with its nitrile gasket; you must provide 1/4 in tubing, pipe thread sealant and any mounting hardware.

Which version of the 22FR86 should I choose for a 1/4 in tube system?

The 22FR86 is a single SKU — 1/4 in tube by 1/4 in MNPT, 90-degree nickel-plated brass — so select this model when your tube and pipe threads are both 1/4 in.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.