We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Nickel-plated brass 90-degree push-fit elbow fitting

Value Brand

Value Brand 22FR85 1/4" Tube x 1/8" MNPT Nickel Brass 90 Degree Elbow bathware

SKU CH-GAD4-PP7KB

A push-fit brass elbow joins 1/4" tubing to 1/8" MNPT threads with pre-applied sealant, rated 250 psi and 160°F

  • TypeOther
  • Nickel-plated brass resists corrosion in wet environments
  • Push-to-connect design speeds installation without tools
  • 90-degree elbow routes tubing cleanly in tight spaces
  • Rated for 250 psi and 160 °F operating limits
  • Pre-applied thread sealant ensures leak-free NPT connections

1/4" Tube to 1/8" MNPT Elbow

This nickel-plated brass elbow joins a quarter-inch tube to a one-eighth-inch male pipe thread at a ninety-degree angle. It is rated for two hundred fifty psi and one hundred sixty degrees Fahrenheit. Installers working on potable-water or pneumatic lines will find the C28000 brass body suitable for those pressures.

Push-to-connect end with pre-applied sealant

The tube side uses a push-to-connect design that grips without tools, while the threaded side carries factory-applied thread sealant to speed assembly. No separate tape or paste is required on the male threads, reducing the chance of leaks from missed wraps.

Simple push-fit installation.

Push the tube in until it bottoms against the internal stop; an incomplete seat is the most common cause of weeping. The brass body resists cross-threading on the MNPT side, but over-tightening can still strip the softer threads. California Proposition 65 warnings apply.

Highlights

  • Nickel-plated brass resists corrosion in wet environments
  • Push-to-connect design speeds installation without tools
  • 90-degree elbow routes tubing cleanly in tight spaces
  • Rated for 250 psi and 160 °F operating limits
  • Pre-applied thread sealant ensures leak-free NPT connections

Specifications

BrandZORO SELECT
TypeOther

Questions about this item

Will the push-to-connect seal on the 1/4" tube side need replacement after extended use?

The fitting uses a permanent push-to-connect design on the 1/4" tube side with no user-serviceable seal, so it is not intended for periodic replacement.

What pressure limit will be reached first when the system runs continuously at the maximum 250 psi rating?

The brass body and C28000 material grade are rated for a maximum operating pressure of 250 psi, which is the primary limit under sustained use.

How much heat can the brass elbow handle when hot water circulates through it all day?

The fitting is rated for a maximum operating temperature of 160 degrees F, suitable for continuous hot-water circulation within that limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.