Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00930292BTC
In stock
Value Brand
Value Brand 22FR64 1/4" Tube Nickel Brass Tee
A nickel-plated brass tee fitting connects three 1/4-inch tubes for fluid or gas lines
- TypeOther
- Nickel-plated brass resists corrosion in fluid systems
- 1/4-inch tube connection fits standard fittings
- Operates reliably from 0 to 160 degrees F
- Nitrile rubber gasket seals against leaks
- Polyester-cotton ripstop material adds durability
Quarter-Inch Brass Tee for Fluid Lines
This nickel-plated brass tee connects three quarter-inch tube sections in plumbing or pneumatic circuits. The nitrile rubber gasket seals against leakage across the stated temperature range. It suits installers who need a compact branch fitting for water, air or inert gas distribution.
Nickel-Plated Brass With Nitrile Seal
The gray finish indicates the nickel plating that resists surface corrosion in damp environments. Brass construction handles the published 160 degrees Fahrenheit upper limit without softening. Tube-style connections mean the fitting slides onto tubing and secures with a compression nut or push-to-connect collar.
Verify Tube Diameter and Media Compatibility
Confirm that every line in the circuit uses quarter-inch outside-diameter tubing before ordering. Check that the conveyed fluid is compatible with nitrile rubber at your operating temperature. Note the Proposition 65 notice regarding listed chemicals.
Highlights
- Nickel-plated brass resists corrosion in fluid systems
- 1/4-inch tube connection fits standard fittings
- Operates reliably from 0 to 160 degrees F
- Nitrile rubber gasket seals against leaks
- Polyester-cotton ripstop material adds durability
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Other |
Questions about this item
What temperature range does the 1/4" tube nickel brass tee handle?
The tee operates from 0 to 160 degrees F, so it suits typical cold and hot water lines within that span.
What tubing size and fitting type does this tee accept?
It connects to 1/4 inch tube using a tube fitting connection on all three ports.
How do you seal the tee correctly and what mistake should be avoided?
Use the nitrile rubber gasket supplied with the fitting; the common error is omitting the gasket or reusing an old one, which causes leaks.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
