We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White ABS Schedule 40 street elbow, 22-1/2 degree bend, 3 inch hub by spigot

Value Brand

Value Brand 22-1/2 Degree Street Elbow 3 In Hub x Spigot Schedule 40

SKU CH-ABHR-RC645

A 3-inch Schedule 40 ABS street elbow with a 22-1/2 degree hub-to-spigot bend for DWV direction changes

  • 22-1/2 degree angle enables smooth directional changes in tight ABS pipe runs
  • Schedule 40 wall thickness handles standard pressure demands in residential drainage systems
  • Hub-by-spigot connection fits directly into a 3-inch hub and over a 3-inch spigot without extra couplings
  • Cell class 32222 per ASTM D3965 confirms consistent material quality for long service life
  • Rated from -40 °F to 180 °F for reliable performance across seasonal temperature swings

22-1/2 Degree Street Elbow for 3 Inch Pipe

This ABS street elbow connects a 3 inch hub to a spigot at a 22-1/2 degree angle. It is built to Schedule 40 dimensions for standard drainage, waste and vent installations. The fitting suits plumbers and contractors working on residential or light commercial pipe runs.

Temperature range and material performance

The ABS material handles continuous temperatures from -40 to 180 degrees Fahrenheit. Cell class 32222 per ASTM D3965 confirms the material quality for pressure and impact resistance. The fitting adds no moving parts, so it operates silently and draws no power.

Behaviour under sustained system pressure

The Schedule 40 wall thickness maintains structural integrity under constant internal pressure in DWV systems. The 22-1/2 degree bend preserves flow characteristics without creating turbulence during continuous discharge. Joint integrity relies on correct solvent cement application rather than the fitting alone.

Highlights

  • 22-1/2 degree angle enables smooth directional changes in tight ABS pipe runs
  • Schedule 40 wall thickness handles standard pressure demands in residential drainage systems
  • Hub-by-spigot connection fits directly into a 3-inch hub and over a 3-inch spigot without extra couplings
  • Cell class 32222 per ASTM D3965 confirms consistent material quality for long service life
  • Rated from -40 °F to 180 °F for reliable performance across seasonal temperature swings

Specifications

BrandMUELLER INDUSTRIES

Questions about this item

How do I install the 3 in hub x spigot street elbow and what step is often missed?

Dry-fit the spigot into the hub, mark alignment, apply ABS cement to both surfaces, push fully home with a quarter turn, and hold until the joint sets.

What maintenance or replacement will the ABS fitting need later?

The Schedule 40 ABS material resists corrosion; inspect joints periodically for cracks or leaks and replace the elbow if any damage appears.

What limit appears first under sustained use at high temperature?

The fitting is rated to 180 degrees F; continuous exposure near that temperature will reduce pressure capacity before any other limit is reached.

More in Fittings & Couplings

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.