We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A metallic reducing tee fitting with three threaded openings in a T shape

Value Brand

Value Brand 2" x 1/2" x 2" Reducing Tee

SKU CH-9GS4-MW2W5

A Class 150 reducing tee with FNPT connections for 2 in x 1/2 in x 2 in pipe, FM Approved and UL Listed to 300 psi at 150 °F

  • TypeOther
  • Reduces pipe diameter for flexible routing with 2 in x 1/2 in x 2 in FNPT connections
  • Handles demanding systems at 300 psi max pressure and 150 psi saturated steam rating
  • Operates reliably across -20 to 150 degrees F for broad temperature compatibility
  • Meets ASME B 16.3 standard and carries UL Listed and FM Approved certifications for code compliance
  • Class 150 schedule fits standard piping installations for straightforward integration

Reducing Tee for Plumbing Systems

The Value Brand reducing tee connects three pipe sections at a junction where the branch line is smaller than the main run. It suits residential and light-commercial water, air or steam installations that require a 2 in by 1/2 in by 2 in transition. The FNPT threaded ends allow direct assembly without welding or special tools.

Thermals and Pressure Limits

The fitting handles saturated steam up to 150 psi and a maximum pressure of 300 psi at 150 degrees Fahrenheit. Its temperature range spans from minus 20 degrees to 150 degrees Fahrenheit, so it remains stable in cold-water supplies and moderate steam lines. No moving parts mean silent operation and no power draw.

Build Quality and Installation

The tee meets ASME B 16.3 and carries UL listing with FM approval, confirming compliance with recognised piping standards. Class 150 rating and FNPT threads provide a reliable seal when assembled with appropriate thread sealant. The compact brass body resists corrosion in typical indoor plumbing environments.

Highlights

  • Reduces pipe diameter for flexible routing with 2 in x 1/2 in x 2 in FNPT connections
  • Handles demanding systems at 300 psi max pressure and 150 psi saturated steam rating
  • Operates reliably across -20 to 150 degrees F for broad temperature compatibility
  • Meets ASME B 16.3 standard and carries UL Listed and FM Approved certifications for code compliance
  • Class 150 schedule fits standard piping installations for straightforward integration

Specifications

BrandZORO SELECT
TypeOther

Questions about this item

How do I install the 2 in x 1/2 in x 2 in reducing tee with FNPT connections without cross-threading?

Clean all threads, apply PTFE tape clockwise on male ends only, hand-tighten each joint then turn one to two full turns with a wrench; the branch outlet is the 1/2 in port so orient it before final tightening.

What maintenance or replacement will the Class 150 reducing tee need over time?

Inspect threads annually for corrosion or leakage; replace the tee if you see cracked cast iron, stripped FNPT threads, or any weep at the 300 psi rating limit.

What is the first limit reached under sustained pressure and temperature?

The saturated steam ceiling of 150 psi is reached before the 300 psi water rating, so steam service dictates the maximum continuous operating pressure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.