Value Brand 2 in 50 ft Rubber Water Discharge Hose 125 PSI White

50 ft Rubber Discharge Hose

This 50 ft rubber water discharge hose carries a 125 psi working pressure at 70 F and a 375 psi burst rating with a 3:1 safety factor. The 2 in inside diameter and braided fiber reinforcement suit high-volume water transfer on construction sites, farms and municipal jobs. Fittings are 2 in MNPSM aluminum on one end and 2 in brass on the other for quick, secure connections. Operates from -22 F to 180 F.

Lay-flat coil, thread-on fittings

The hose ships in a flat coil that unrolls straight without memory kinks, so one person can deploy the full length in minutes. Thread the aluminum MNPSM end onto the pump outlet and the brass end onto the discharge pipe; hand-tighten then snug with a strap wrench. The only common issue is cross-threading the brass fitting if the threads are dirty — clean both faces and start by hand to avoid leaks.

125 psi steady flow, 375 psi limit

At the rated 125 psi the hose moves large volumes of water continuously from -22 F to 180 F without softening or hardening. The 375 psi burst pressure and 3:1 safety factor absorb normal pressure spikes from pump start-up or valve closure. Sustained pressure above 125 psi or exposure to oils, solvents or sustained UV will shorten service life and is outside the design envelope.