We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PVC DWV wye with 45-degree elbow, 2-inch hub, Schedule 40

Value Brand

Value Brand 2" Hub PVC DWV Wye & 45 Degree Elbow

SKU CH-BMRY-T6VNX

Connects 2-inch PVC drain pipes at a 45-degree branch using a hub connection

  • Schedule 40 PVC rated for 140 °F service
  • ASTM D1784 cell class 12454 material standard
  • Hub connection simplifies solvent-weld installation
  • Combined wye and 45 ° elbow reduces fitting count
  • White PVC suitable for drain, waste and vent systems

2-inch PVC DWV Wye with 45-Degree Elbow

This white Schedule 40 PVC fitting combines a wye branch and a 45-degree elbow in a single hub connection for 2-inch pipe. It is intended for drain, waste and vent systems in residential or light commercial plumbing. The material meets ASTM D1784 cell class 12454 for consistent quality.

Solvent-weld hub installation

The hub ends accept 2-inch PVC pipe for solvent cement joining, a standard method for DWV work. Because the fitting is not rated for pressure applications, it must not be used in pressurised supply lines or forced-main systems. Incorrect use under pressure can lead to joint failure and water damage.

Handles continuous drainage flow up to 140°F

Under sustained gravity-flow conditions the fitting performs reliably at temperatures up to 140 degrees Fahrenheit. The rigid Schedule 40 wall resists deformation from hot wastewater discharge typical in kitchen or laundry drains. It is not designed for pressurised or high-temperature process piping beyond the stated limit.

Highlights

  • Schedule 40 PVC rated for 140 °F service
  • ASTM D1784 cell class 12454 material standard
  • Hub connection simplifies solvent-weld installation
  • Combined wye and 45 ° elbow reduces fitting count
  • White PVC suitable for drain, waste and vent systems

Specifications

BrandZORO SELECT

Questions about this item

How do I confirm the solvent-welded joints are secure after installation?

Check that each hub connection shows a continuous bead of cement around the full circumference and that the 45 degree branch runs at the correct angle for your drainage layout.

What comes with the fitting and what must I supply myself?

The package contains the white PVC wye and 45 degree elbow only; you will need Schedule 40 pipe, primer and solvent cement rated for ASTM D1784 cell class 12454.

Which version of this fitting should I choose for a standard DWV system?

Select the 2 inch hub Schedule 40 model in white PVC; it meets ASTM D1784 cell class 12454 and is rated for 140 degrees F maximum temperature in non-pressure drainage service.

More in Fittings & Couplings

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.