We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Matte-black brass spacer with male and female G1/4 threads

Thermal Grizzly

Thermal Grizzly TG-DM-FIT-0005 DeltaMate Extender MF7 7mm G1/4 Male-to-Female Spacer

SKU CH-QRNS-8D7YH MPN TG-DM-FIT-0005

A 7 mm brass spacer with G1/4 threads that adds clearance between water-cooling ports and fittings

  • FeaturesMachined brass extender fitting with EPDM O-ring, G1/4" thre
  • Adds 7 mm clearance between port and fitting with G1/4 male-to-female threads
  • Machined brass body with EPDM O-ring resists corrosion and ozone exposure
  • Uniform outer diameter matches all DeltaMate parts for flush assembly
  • Installs securely using an 8 mm hex key without damaging surfaces
  • Combines with two DeltaMate Rotary 90° fittings to form a 28 mm offset double rotary

Precision Water-Cooling Spacer

The Thermal Grizzly DeltaMate Extender MF7 is a machined brass fitting that adds a 7 mm offset between a component port and a standard G1/4 fitting. It serves builders who need exact alignment in tight custom-loop layouts where standard fittings sit too close or clash with neighbouring hardware.

Critical Thread Specification

This extender presents one G1/4 male thread and one G1/4 female thread, so it only fits components and fittings that share that exact thread standard. Loops using metric or NPT ports cannot accept it without additional adapters.

Straightforward Hex-Key Installation

An 8 mm hex key engages the robust body for firm tightening without marring the matte-black chromium finish. The uniform outer diameter matches other DeltaMate parts, preventing misalignment when combined with two DeltaMate Rotary 90° fittings to create a 28 mm offset double rotary. Over-tightening can damage the EPDM O-ring, so stop when resistance becomes firm.

Highlights

  • Adds 7 mm clearance between port and fitting with G1/4 male-to-female threads
  • Machined brass body with EPDM O-ring resists corrosion and ozone exposure
  • Uniform outer diameter matches all DeltaMate parts for flush assembly
  • Installs securely using an 8 mm hex key without damaging surfaces
  • Combines with two DeltaMate Rotary 90° fittings to form a 28 mm offset double rotary

Specifications

BrandThermal Grizzly
ModelTG-DM-FIT-0005
FeaturesMachined brass extender fitting with EPDM O-ring, G1/4" threads
Part NumberTG-DM-FIT-0005

Questions about this item

How much extra clearance does the 7 mm extender add between a water-block port and the fitting?

The MF7 spacer increases the gap by 7 mm, letting you clear tall VRM heatsinks or tight tubing bends without changing the G1/4 thread engagement.

What thread standard do the male and female ends use, and what does that limit?

Both ends are G1/4 BSPP, so the extender only works with components and fittings that share that exact parallel thread — it will not seal on NPT or metric sizes.

What tool is needed to tighten the brass body without damaging the black chromium finish?

An 8 mm hex key fits the machined flats, giving enough leverage to seat the EPDM O-ring while protecting the anodised surface.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.