Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00916899BTC
In stock
Value Brand
Value Brand 2" FNPT Stainless Steel Ball Valve Inline
A 2-inch female NPT stainless-steel ball valve with 316-grade body and standard-port L-flow for inline fluid control
- TypeOther
- 316 stainless steel body resists corrosion
- Two-piece construction simplifies maintenance
- Standard port design maintains flow efficiency
- Female NPT threads enable direct piping
- L-flow pattern supports three-way diversion
2-inch FNPT Stainless Steel Ball Valve
This two-inch female NPT ball valve is built from 316 stainless steel for corrosion-resistant service. The two-piece body uses an L-flow three-way pattern with standard-port geometry. It suits industrial and commercial piping systems that require manual flow diversion.
Installers needing a manual three-way diverter
The valve handles side-entry flow between two female NPT ports of the same nominal size. It does not serve applications that require automated actuation, full-port capacity or a four-way flow path. Systems demanding a different port arrangement or powered operation should select another model.
316 stainless steel body material
Grade 316 stainless steel provides the chemical resistance that determines suitability for aggressive media. The two-piece construction and standard-port ball define the flow coefficient and pressure envelope. Verify media compatibility and pressure requirements against this material before installation.
Highlights
- 316 stainless steel body resists corrosion
- Two-piece construction simplifies maintenance
- Standard port design maintains flow efficiency
- Female NPT threads enable direct piping
- L-flow pattern supports three-way diversion
Specifications
| Brand | Zoro Select |
|---|---|
| Type | Other |
Questions about this item
Will the 2" female NPT threads on this 316 stainless steel valve mate with my existing 2" male NPT pipe?
Yes, the inlet and outlet are both 2" female NPT, so they accept standard 2" male NPT pipe threads directly.
What is the common installation mistake with this two-piece 316 stainless steel ball valve?
Over-tightening the two-piece body joint can distort the seal; tighten pipe connections first, then snug the body bolts only to the manufacturer's torque value.
How often should I replace the PTFE seats in this L-flow three-way valve?
Inspect seats annually; replace them when you see leakage or stiff handle operation, typically every two to five years depending on cycle frequency and media.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
