We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass threaded pipe cap, two inch nominal size, yellow metal finish

Value Brand

Value Brand 2" Brass Cap FNPT Class 125 200 psi

SKU CH-92WW-XGX27

2-inch brass pipe cap with FNPT threads rated for 200 psi and 400 degrees F

  • 2" nominal pipe size fits standard plumbing connections
  • Brass construction resists corrosion in water systems
  • Class 125 rating suits typical residential pressure needs
  • 200 psi maximum operating pressure handles demanding applications
  • 20 to 400 degrees F operating range works in varied environments

Brass Cap for 2 Inch Pipe

This Zoro Select brass cap fits a 2 inch nominal pipe size and uses FNPT threads to close off a line. It is rated for Class 125 service and a maximum operating pressure of 200 psi. The fitting suits plumbing systems that require a simple threaded closure.

Threaded Connection and Pressure Limit

The FNPT threads create a tapered seal that tightens as the cap is turned onto a male pipe end. Class 125 defines the pressure-temperature envelope, capping the fitting at 200 psi for water, oil or gas within the rated range. Exceeding this pressure risks joint failure.

Temperature Range and Material

Red brass construction handles temperatures from minus 20 degrees to 400 degrees Fahrenheit without degrading. No seal or thread sealant is pre-applied, so the installer must add tape or compound during assembly. California Proposition 65 warnings apply to this product.

Highlights

  • 2" nominal pipe size fits standard plumbing connections
  • Brass construction resists corrosion in water systems
  • Class 125 rating suits typical residential pressure needs
  • 200 psi maximum operating pressure handles demanding applications
  • 20 to 400 degrees F operating range works in varied environments

Specifications

BrandZORO SELECT

Questions about this item

Which pipe size and pressure class should I select for a 2-inch line rated to 200 psi?

This cap is made for 2-inch nominal pipe size and carries a Class 125 rating with a 200 psi maximum operating pressure, matching those exact requirements.

What does the 200 psi rating mean once the cap is installed on a brass threaded line?

It indicates the cap can safely contain up to 200 psi at temperatures between -20 °F and 400 °F when properly threaded onto a compatible brass fitting.

How does the FNPT thread standard affect sealing and pressure limits in practice?

The FNPT tapered threads create a mechanical seal that, together with the brass material and Class 125 rating, supports the full 200 psi working pressure when assembled correctly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.