We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized malleable iron 90 degree elbow with FNPT threads

Value Brand

Value Brand 1LBG9 1" FNPT Galvanized 90 Degree Elbow

SKU CH-BKJ2-P2ZCH

A galvanized malleable-iron 90-degree elbow with 1-inch FNPT threads, rated to 2000 psi at 150°F and compliant with ASME B16.3, B16.4, ASTM A197 and A47 standards

  • Durable galvanised malleable iron resists corrosion
  • 90-degree FNPT elbow redirects flow in tight spaces
  • Class 300 rating handles 2000 psi at 150 °F WOG
  • Meets ASME B16.3, B16.4, ASTM A197 and A47 standards
  • FM approved and UL listed for code compliance

1" FNPT Galvanized Elbow for Piping Systems

This 90-degree elbow connects two female NPT threads in a 1-inch pipe run. The galvanized malleable iron body meets ASME B16.3 and B16.4 standards and carries FM approval and UL listing. It suits water, oil or gas distribution in residential and commercial installations.

Class 300 Rating Handles 2000 psi at 150 Degrees F

The fitting withstands a working pressure of 2000 psi at 150 degrees Fahrenheit and a saturated steam pressure of 300 psi. Galvanized coating resists corrosion in normal service. No moving parts means silent operation and zero power draw.

Malleable Iron Construction Absorbs Thermal Cycling

Under sustained pressure and temperature cycles the Class 300 wall thickness maintains seal integrity without deformation. The material complies with ASTM A47 and ASTM A197 for consistent mechanical properties. California Proposition 65 warnings apply for chemical content.

Highlights

  • Durable galvanised malleable iron resists corrosion
  • 90-degree FNPT elbow redirects flow in tight spaces
  • Class 300 rating handles 2000 psi at 150 °F WOG
  • Meets ASME B16.3, B16.4, ASTM A197 and A47 standards
  • FM approved and UL listed for code compliance

Specifications

BrandZoro Select

Questions about this item

How do I install the 1" FNPT galvanized elbow without cracking the fitting?

Clean the 1" FNPT threads, apply PTFE tape or pipe sealant, hand-tighten then turn one to two full turns with a wrench; the step often missed is stopping before the joint bottoms out on the Class 300 malleable iron body.

What maintenance or replacement will the galvanized elbow need over time?

Inspect the zinc coating annually for white rust or pitting; if the galvanised layer is breached the underlying malleable iron can corrode, requiring full replacement of the 90-degree fitting.

What pressure limit appears first during sustained hot-water use at 150 °F?

The 2000 psi WOG rating governs continuous water, oil or gas service at 150 °F; saturated steam is limited to 300 psi per the ASME B16.3 and B16.4 listings.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.