We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black corrugated polyethylene tubing coil, half inch diameter, twenty five feet long

Value Brand

Value Brand 16Y253 Corrugated Tubing 1/2 in 25 ft

SKU CH-S7AJ-XA90X

Protects wires with 1/2 in corrugated polyethylene tubing, 25 ft long, split for easy installation, self-extinguishing and chemical-resistant from 30 to 175 °F

  • TypeCable Management & Conduit
  • Protects cables up to 175 °F with polyethylene construction
  • 25 ft length covers long runs in one piece
  • Split design lets you insert wires without disassembly
  • Self-extinguishing material adds fire safety in electrical installs
  • Resists chemicals and abrasion for durable cable management

Value Brand 16Y253 Split Corrugated Tubing

This polyethylene tubing protects wire bundles in automotive and industrial environments. The split design lets you insert cables without disconnecting terminals. Black colour resists UV exposure. Rated from 30 to 175 degrees F for demanding engine-bay or machinery use.

Installation notes for 1/2 in conduit

Push wires into the split opening and route along the run; the tubing self-closes around the bundle. Secure ends with tape or cable ties to prevent the slit from gaping under vibration. Minimum dynamic bend radius is 1.61 in and static radius is 1.95 in — tighter bends can kink the wall.

Compatibility checks before ordering

Verify your bundle outside diameter fits within the .64 in inside diameter. Confirm the .84 in outside diameter clears surrounding brackets or panels. Ensure the operating environment stays between 30 and 175 degrees F and that outdoor exposure is not required.

Highlights

  • Protects cables up to 175 °F with polyethylene construction
  • 25 ft length covers long runs in one piece
  • Split design lets you insert wires without disassembly
  • Self-extinguishing material adds fire safety in electrical installs
  • Resists chemicals and abrasion for durable cable management

Specifications

BrandZORO SELECT
TypeCable Management & Conduit

Questions about this item

How do I confirm the 1/2 in corrugated tubing is protecting wires correctly after installation?

Check that cables slide freely inside the 0.64 in inner diameter, the split stays closed around them, and the run does not exceed the 175 °F maximum or drop below 30 °F operating limits.

What comes with the 25 ft roll and what extra items are needed to finish the job?

The box contains a single 25 ft length of black polyethylene corrugated loom with a 0.01 in wall; you must supply wire, connectors, tape or ties, and any mounting hardware separately.

Should I choose the 1/2 in nominal size or a different diameter for my cable bundle?

Select the 1/2 in size when your bundle fits comfortably within the 0.64 in inside diameter and you can meet the 1.61 in dynamic or 1.95 in static minimum bend radii.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.