We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White Schedule 40 PVC compression coupling 1-1/2 inch

Value Brand

Value Brand 160-107 1-1/2" Compression PVC Coupling Schedule 40

SKU CH-QWHX-12KM2

Schedule 40 PVC compression coupling joins 1-1/2 inch pipe at up to 200 psi and 140 °F

  • Schedule 40 PVC rated for 200 psi at 73 °F
  • Compression connection installs without solvent or special tools
  • NSF certified material meets drinking-water standards
  • White PVC withstands temperatures up to 140 °F
  • Fits 1-1/2 inch pipe for straightforward repairs

1-1/2" Schedule 40 PVC Compression Coupling

This white PVC coupling joins two 1-1/2 inch pipes using compression connections. It is rated for 200 psi at 73 degrees F and handles temperatures up to 140 degrees F. The fitting carries NSF certification for potable water use.

Schedule 40 System Integration

The compression ends install without solvent cement, so no primer or glue is required during assembly. This speeds up repairs and allows disassembly if the line must be altered later. The coupling fits standard Schedule 40 PVC pipe dimensions.

Sustained Pressure Performance

Under continuous operation the coupling maintains its seal at the full 200 psi rating when the water temperature stays at or below 73 degrees F. At higher temperatures up to 140 degrees F the pressure capacity decreases. The NSF mark confirms the material meets health-effect standards for long-term contact with drinking water.

Highlights

  • Schedule 40 PVC rated for 200 psi at 73 °F
  • Compression connection installs without solvent or special tools
  • NSF certified material meets drinking-water standards
  • White PVC withstands temperatures up to 140 °F
  • Fits 1-1/2 inch pipe for straightforward repairs

Specifications

BrandZORO SELECT

Questions about this item

How long can the coupling hold its 200 psi rating at 73 °F before creep becomes the limiting factor?

The Schedule 40 PVC body is rated for 200 psi at 73 °F; sustained pressure at that temperature will gradually reduce the safety margin as the material creeps over time.

Will the compression joint leak or loosen when the line cycles between cold water and 140 °F?

The fitting is rated to 140 °F; thermal expansion and contraction at that temperature can reduce compression seal tension, so re-tightening may be needed after repeated hot cycles.

What pipe schedule and diameter must already be on site for this coupling to seal?

The coupling requires 1-1/2 inch Schedule 40 PVC pipe; it will not seal on thin-wall, metric or other schedule pipe.

More in Fittings & Couplings

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.