We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 25mm PPR pipe fitting with smooth finish for welding connections

ifan

ifan 25mm PPR Fitting PN25 0-75°C White

SKU CH-N5ZS-6WCPW

25 mm PPR fitting rated PN25 for 0–75 °C water systems with heat-fusion welding

  • TypeFitting & Connector Sets
  • Tube Size25mm
  • Item Count1 Carton
  • Thread Size25mm
  • End ConnectionsWelding
  • Standards/CertificationsISO
  • Withstands 75°C for hot water systems
  • PN25 rating handles high-pressure plumbing demands
  • PPR body resists corrosion in all water types
  • Heat-fusion welding creates leak-proof joints
  • Smooth bore maintains unobstructed flow long-term

25 mm PPR Pressure Fitting

This white PPR fitting connects 25 mm pipes using heat-fusion welding for a seamless joint. It is rated PN25 and certified to ISO standards for potable water systems. The corrosion-resistant body handles continuous temperatures from 0 to 75 °C. Installers and specifiers choose it for reliable hot and cold distribution.

Upgrade from Threaded or Glued Joints

Heat-fusion welding removes the leak paths common with threaded adapters or solvent-cement connections. The switch is justified when a permanent, leak-proof seal is required and disassembly is not planned. It also eliminates the need for separate sealants or tapes during assembly.

Sustained Pressure and Temperature Performance

The PN25 rating means the fitting maintains structural integrity at 25 bar across the full 0–75 °C range without creep failure. Smooth interior walls reduce friction loss during continuous flow. PPR material resists scaling and chemical attack, preserving flow capacity over decades of service.

Highlights

  • Withstands 75°C for hot water systems
  • PN25 rating handles high-pressure plumbing demands
  • PPR body resists corrosion in all water types
  • Heat-fusion welding creates leak-proof joints
  • Smooth bore maintains unobstructed flow long-term

Specifications

TypeFitting & Connector Sets
Tube Size25mm
Item Count1 Carton
Thread Size25mm
End ConnectionsWelding
Standards/CertificationsISO
Maximum PressurePN25
Body MaterialPPR
Temperature Range0-75°C
FeaturesEco-Friendly

Questions about this item

What pipe diameter does the 25mm fitting connect?

The fitting joins 25mm PPR pipe using heat-fusion welding on both ends.

Which installation step is most often done incorrectly?

Skipping the required heating time before pushing the pipe into the socket causes weak joints.

When should the fitting be inspected or replaced?

Check joints after pressure testing and if the system ever exceeds 75°C or PN25 pressure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.